Looks beautiful, but it’s hard to upstage the Hoff right next to it.
Quoted from okgrak:Can someone help me out and post a picture of their power supply board. I am particularly interested in connector CN7. Thanks in advance.
I replaced my power supply Board with a rotten-dog one and haven't looked back, Not sure if a picture of the old PSB not in the game will help you or not. I can definitely Take a picture of it if that helps tho!
Quoted from Westbury:I replaced my power supply Board with a rotten-dog one and haven't looked back, Not sure if a picture of the old PSB not in the game will help you or not. I can definitely Take a picture of it if that helps tho!
I ended up resolving my issue. I had flickering with my bottom gi string, which turns out is driven completely differently than the other gi strings. I was rewired it to piggyback off another gi string and now I’ve got smooth gi leds all around. Huge upgrade for this machine in my opinion.
Just a FYI but FilamentPrinting made me these awesome 3D printed Coin door Eject buttons for my WWF and i really like how they turned out! Just in case anyone else is wanting to add a little extra to their WWF Royal Rumble!
IMG_1652 (resized).jpegIMG_1653 (resized).jpegQuoted from Westbury:Just a FYI but filamentprinting made me these awesome 3D printed Coin door Eject buttons for my WWF and i really like how they turned out! Just in case anyone else is wanting to add a little extra to their WWF Royal Rumble!
[quoted image][quoted image]
Those are cool. How much are they?
Quoted from gac:Those are cool. How much are they?
Off the top of my head i cant remember, I bought a few sets for a couple games, They werent much tho, especially if you live in the US i'm sure the shipping is a quarter of what i paid being in Canada, If you like them def message @filamentprinting, he does really awesome work. I am in no way shape or form connected to or being paid by FilamentPrinting to say this haha I just really like how my buttons look! instead of the old crusty red ones that have been in the machine since it came off the factory floor!
Quoted from Jerickso77:Joined the club! Is there a way to adjust the bass or is there just 1 volume knob for everthing?
[quoted image]
1 volume for everything. Pinsound is an option if you want to adjust things like that
How tough is the left ramp on yours? Mine is almost impossible to make from a trap. Goes halfway up and comes back. It would be easier from an inlane but a little flipper hop hurts that as well. Maybe I need a flipper rebuild or is that just how it is? It's not impossible but seems like it should be a little easier.
Quoted from Jerickso77:How tough is the left ramp on yours? Mine is almost impossible to make from a trap. Goes halfway up and comes back. It would be easier from an inlane but a little flipper hop hurts that as well. Maybe I need a flipper rebuild or is that just how it is? It's not impossible but seems like it should be a little easier.
Mine has rebuilt flippers and a new coil, and I make the shot about 75% of the time if I hit it cleanly from a trap.
Quoted from okgrak:Mine has rebuilt flippers and a new coil, and I make the shot about 75% of the time if I hit it cleanly from a trap.
I might be 60-75% here.
Definitely not original flippers they have pretty good feel to my newbie eyes/hands.
Does anyone know where to find new upper playfield flipper bats? Im restoring a machine and could really use them. I feel like I have looked everywhere.
Quoted from Jerickso77:Anyone know what these short fat black post rubbers are called? Never seen any like it before.
[quoted image]
They are 1/2 inch post sleeves. You can get them in just about any color you want at Titan Pinball.
Quoted from Jerickso77:The hell is the point of having a gate here? Did someone shop it and put it back on the wrong side?
[quoted image]
Its correct. I thought the same thing. Must be there to absorb strong shots.
Quoted from Jerickso77:The hell is the point of having a gate here? Did someone shop it and put it back on the wrong side?
[quoted image]
Haha. That’s what it looks like. I’ve owned that title two times and never seen a gate there.
Is there supposed to be gate on the other side also? Ball has a tendency to bounce back into the orbit a little and get stuck.
Can't seem to find a pinsound mix, does anyone have one that they are happy to share?
Found some good ones on YouTube, and have asked if I could get a copy (even offering to pay) but no response.
Quoted from dmeca12:Can't seem to find a pinsound mix, does anyone have one that they are happy to share?
Found some good ones on YouTube, and have asked if I could get a copy (even offering to pay) but no response.
Search this thread for a YouTube clip of my mix.
Quoted from okgrak:Search this thread for a YouTube clip of my mix.
Awesome mix!! Pm sent
Quoted from Jerickso77:Auto plunger broke right before the weekend. Bummer.[quoted image]
Thats no fun! Been there done that. Easy fix at least.
I have my rear legs jacked up as high as I can and front legs as low as possible and I’m still at 5.7 degrees. Best way to get to 6.5 or do other owners here have it lower? I’m pretty sure I have the longer leg levellers too
I have 3 inch leg levellers and have it about 7 degrees. The back could could actually go a little higher.
https://www.pinballlife.com/heavy-duty-leg-leveler-with-nut.html
I use these. No issues getting to 6.5 degrees.
Quoted from okgrak:https://www.pinballlife.com/heavy-duty-leg-leveler-with-nut.html
I use these. No issues getting to 6.5 degrees.
Maybe I don’t have the correct legs then because I have 3” levellers jacked right up and can’t get higher than 5.7
So I'm in multiball, get the super lit than drain to 1 ball but it keeps going? After awhile the crowd counts to 3 and another ball is plunged. Is this a known bug? I think it has happened before but only when the super is lit.
I’d like to know if anyone has done the Prototype decals at all and what colour powdercoat was used with them?
Quoted from Jerickso77:I used mostly cool white for the GI. Red in the pops and the upper rollovers. Warm white on the upper playfield.[quoted image]
That looks like mine except I also have cool white in upper playfield. Was the way I got it. Looks like the GI is meant to have cool white based on the art
Mine is version 1.03 but I see there are roms for 1.06. Anyone know if there is anything wlrth upgrading for?
I will say the customer service I received from Mezel Mods was the best I could have imagined. They forgot to ship the power adapter for the speaker lights, realized it and emailed me right away. Kristin shipped it out immediately. Great communication.
The installation was a breeze and I also added the color dmd. So happy with how they look
Quoted from jardine:Hey guys!! Just joined the club!
Wondering if anyone can give me an idea where to find the original speaker grills. Mine is missing one of the WWF painted logos.
Also, gonna change the rubbers.....white or black?!
[quoted image]
Black rubbers!
So just gave it the once over and an initial light clean. Need to strip and spit and polish because, well, that's what I do with all new to me machines.
I did notice however, a lot of connectors not plugged in.
Can anyone confirm this is normal?? Never seen so many not in use before?!?
124512195_359133381817275_4565462396722765982_n (resized).jpg124648005_385404672608120_1173726069310641570_n (resized).jpg124776325_651508862421612_4491773063279222471_n (resized).jpg124803213_420832242255260_3341794813358105186_n (resized).jpgWanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/wwfrr-club/page/30?hl=electronmagic and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.