The Money In The Bank is how you activate the Tag Team Championship Match. I believe it also applies to any Title Match, but typically when the game first starts you're immediately into the first match. So if you grab the MITB first, you have to finish the first match, then the next match that start will be for the US Championship. But as far as I know, the ONLY way to initiate the Tag Team Championship is with a MITB briefcase.

MITB is just a way to get a title shot without digging through matches

You qualify Tag Team Titles by starting tag team MB and getting a pin. You then have to restart tag team mb to get the tag team title match

Do tell Tom!

The Money in the Bank Skill Shot is to time the plunge so the ball reaches the top of the ramp/ladder and rolls back down when the MITB light is lit. Too early, late or go over the top and you have to complete MITB the hard way.

Do I win Tom?

The Godfather wins!

Tully!

Got a few questions what is the newest code for the pro? Is there a way to buy the lcd screen to add to the pro? And can a shaker be added to the pro? Thanks

Shaker can be added.
Never seen anyone mod a lcd in the pro

That’s fantastic!! Looks like a great night!!!

Hello my fellow Wrestlemanians. It's with a heavy heart that I must say that today I have left the club. My Wrestlemania has moved on to new pastures. At least I'll always have my Divas translite and the standard John Cena one I framed to remember it by. So now that my WWE is gone, you all should look out for a massive code update this week that adds new wrestlers, modes and fixes all the lingering issues with the game.

Honestly though, I wasn't really looking to sell it and I will miss it, but it needed to go to make room and $$$ for this...which I never thought I would be picking up. I wish you all good luck in the code update department. I can't really say I have a lot of faith at this point. It just seems like there is so much working against it...JT's game, not a big seller, bad code at launch lead to negative overall impression of the game, etc...but who knows. I hope it happens, the game is a lot of fun and could even be that much better with a few tweaks here and there. Enjoy your WWE's and hopefully one of you guys finally legitimately makes it to the Heavyweight Championship wizard mode.

71229915_10217476625900520_8501105034707075072_o (resized).jpg

Joined the club with Wrestlemania LE #248 and having lots fun with it.

Got a question, the auto-launcher isn't able to send the ball all the way up to the ring. I check the launcher mech and position and all seemed good. Has anyone had this problem and found a solution?

-Steve

IMG_20191124_172231 (resized).jpg

IMG_20191124_172236 (resized).jpg

Also, after moving my WWE LE to the basement I can't seem to get the shooter to shoot all the way up to the ring. Sometimes it makes it, most times it hits or bounces off the side rails and doesn't make it. I keep adjusting how the playfield sits and the shooter rod to no avail. Just wanted to see if anyone had a recommendation.

I also am out of the club. Just sold wwe le #002 loaded with mods to Joystixs in Houston Tx. If anyone is looking for a huo mint condition with no dimples on playfield(playfield protector installed right out of box) give Charlie a call.

Sorry to see you go. I *almost* traded it and the guy backed out. It's a blessing in disguise. Just started playing it a lot again and there's a code update on the way!

We can only hope for a code update, it’s been left on the shelf for long enough.

If there is a code update and its good ill buy another one. I loved this game. Just gets boring after 5 yrs of ownership

Where did this come from?

Levi said this in a post a couple weeks ago. He doesn't BS. I imagine at the very least, Ambrose and Trudeau's Ref Image will be replaced.

What are the chances, someone still has the files for the custom cards? I'm looking to print off another set.

I didn't know there were any.

Do we play WWE LE with the sound off this weekend in solidarity with fanless Wrestlemania?

Yeah, check post 656 in this thread by wdpvideo. He no longer has the files.

My Wham bar has been bent and cracked (see photos below) has anyone ever had or seen this happen?

Also are these still available from anyone or will I just have to bend it back and maybe weld or cold weld the crack?

-Steve

IMG_20200406_174154 (resized).jpg

IMG_20200406_174238 (resized).jpg

Hey all! I bought a WWE LE machine about 6 months ago and now im in the process of creating a pinball browser update to include the NWO for Hollywood Hogan Has anyone played around with Pinball Browser on this machine?

My wham bar seems to unscrew itself after some good play, has anyone else had this issue?

Cheers,
Nick

Negative on both, brother.

Hey guys. I have owned my wwe le for just over 2 years. And i love it. I just noticed that my son has a ton of wwe figures , Belts for the figure's and mini ladders. I was thinking about modding the machine using those. Has anyone ever done it? What's your opinion on that.. thanks

Attached is a video of my machine

I havent seen any answers replying this, but I was curious: I am probably getting a pro, and was thinking, if its possible with a small lcs and and an arduino or something, to make the display show the intro for the wrestlers in the pro? Getting the video footage is easy, but then its tying it to the different wrestlers chosen by the player.

Anyone done something similar to talk to a spike code?

Finally got around to adding NWO and DX! Open to suggestions on what to do next, but also keen to see if others have done similar? Anyone

Hey!
I got aware of the GI update which Stern did to make the GI on playfield go dark when the ball is in the upper pf/ring.

Is this the one? https://www.marcospecialties.com/pinball-parts/502-7004-00

I heard that Stern sent it out free to wwe owners, can anyone verify this?

Yes - this was given out to buyers directly from Stern or your distributor when you bought NIB. Which I had with the LE.

I just bought a used WWE, have contacted Stern about this but have not gotten any reply yet. Dont know if they still have it..but anmyways, i see it is being sold so might just buy.

I bought mine somewhere for like $20. Pinballlife?

I am changing all rubbers on my wwe pro. Does anyone have tips for how to remove the upper pf plastics etc to be able to change the lower ring rubbers? It looks intimidating :s

Also, i see the upper pf kickers have been eating into the pf... any experience and fixes for this? See photos. Thanks

20200804_183702 (resized).jpg

20200804_183707 (resized).jpg

20200804_184734 (resized).jpg

Post #484 in this thread shows how to remove the upper playfield for cleaning. It’s easy to do.

would you all say that this is now a complete coded game?

It's pretty damn complete, but supposedly an update is coming. There are multiple people who said this, incl. someone at Stern. I imagine they want to get Trudeau out of the game, drop Ambrose, and correct a couple coding issues.

Ive been wanting one , just want a complete game. You are probably correct. Thanks for the reply

Haha dont really mind trudeau's cameo, its just a game, but i could see Stern not wanting that association.

In my opinion it is complete enough. Not deep but fast and amusing

The only problem I have with the current code is earned Tag Team Multiball points do not get added to your score. Fix that & I'm a happy camper.

Despite the hate, I still think it's a fun & unique game.

wat??

Very sad news to hear Animal from the legion of doom passed away, I’m glad I get to see the greatest tag team of all time on the slingshot plastics an cab art on the LE every time I fire up my wrestlemania.

Anyone know where i could source some le sling plastics and if theres any sources for new or good le playfields?

Awesome slings found thanks les! just need a playfield & translite now to complete my nostalgia moment

I actually have a set of NOS LE sling plastics. I'll shoot you a PM.

Hi all so i couldnt find an le in the uk, gutted but really enjoying the pro, would love to have all the le characters! But have started to turn it into a custom Bret hart edition, so far i have added
Yellow plastic pros & Bret hart engraved custom ctr plastic (thanks colin)
Custom pink/purple paint work
Le cab head decals
Le apron decals
Le lod slings (thanks lesmanley)
Wwf old skool shooter surround
Titan rubbers red white blue
Pink t molding
Blk bats orange rubbers
Invisi glass
Shaker
Purple chrome buttons and clear cab pros
Mirror sides
Custom ladder and money in bank case
Figures added need to swap stone cold with bret!
Things to do still
On order le full cab decals to match the old skool
Custom design bret hart backglass
Custom sound old skool entrances
(If i could find an le pf used awesome) if anyine has a lead let me know please

20201126_124154 (resized).jpg

20201126_124201 (resized).jpg

20201126_124209 (resized).jpg

20201126_124231 (resized).jpg

20201126_124239 (resized).jpg

20201126_124256 (resized).jpg

20201126_124303 (resized).jpg

20201126_124313 (resized).jpg

Does anyone have a set of the LOD sling plastics they can sell me?

A great undertaking you have taken upon yourself, but cool to see you go throuhg with it
I wanted an LE, but the one considering selling expected an actual LE price for it lol. So, I bought a pro. Will not be doing the kind of changes you are doing as I started watching wrestling in modern era (2010+), but I miss the LCD screen, and some classic wrestlers, undertaker and shawn michaels. I have started swapping out Cena audio and animations with Shaun Michaels in Pinball Browser, so that is at least something