Quoted from jbigdoggf:Question... is there a adjust for gobstopper hole default position / angle ?
I keep searching and cannot find it... although I swear I found one before but I could have been confused with text.
Feels like my angle is a little off
Do you mean the angle is off as to where the hole stops (it should only stop at 12 o'clock and 6 o'clock), or the entire rotating mechanism in relation to the playfield (flush vs. too high or too low)? If you mean the latter, there's a little metal... well, I'll just take a photo of mine since my faulty gobstobber mechanism is sitting right next to me
wonka gobstopper (resized).jpg
Turn the threaded metal ring below the nut to raise or lower the gobstopper disc, and the white plastic ring locks/unlocks your ability to turn that metal ring.