Quoted from marioparty34:I have an LE/CE. The recommended location of mod placement makes the Wonkavator lean quite a bit. I was hoping to be able to attach it in a more upright position. Thanks for responding.
Any LE/CE owners willing to share an up close pic of it installed?
This was on my LE a while back! I now have the CE and have to repurchase the Wonkavator.
The reason I think the Wonkavator is made for the SE, to be put in the center with a screw, on the LE & CE this doesn’t work! I think if they made the tab that comes out if the Wonkavator a little longer for the LE & CE it will work with that screw! LerMods emailed me and told me to install on the right side of the ramp lower screw. I felt that when I did install it was on a downward angle and looked out of place! I ended up using heavy 2 way tape and taped it to the center of the ramp right in front of the Wonkavator lock. Great stuff from LerMods and I recommend this to all Wonka owners!
The pic is how it looks installed on the center screw! It was too close to the Wonkavator Mech. It was actually hitting it! LerMods recommends to install on the screw in red circle but when I did it looked like it was facing down as the same slope of the ramp!
Again this is from my LE I had sold, the placement on the LE/CE should be the same. Definitely looking forward to buying this mod again, great stuff
11725D82-6CED-44BC-A203-4423AFFC99D4 (resized).jpeg34B5125C-FBF2-4597-BCE1-40EDD98D943E (resized).jpeg920C08EC-02F1-4AAB-84D9-F99EE8B8408B (resized).jpeg