You're currently viewing posts by Pinsider agima2000.
Click here to go back to viewing the entire thread.
Quoted from pascal-pinball:My camera led never works.
also not in lamp test.
Is it connected correct to the board?
thx[quoted image]
was wrong with me to.
Plug the black cable to the right of the red one just like the others.
Quoted from harryhoudini:Would someone mind taking a picture of the audio board in Wonka? Doesn't look like there is a manual yet available. I am wondering if is the same board as POTC.
Quoted from pascal-pinball:How do you get wonkas office and most secret machine wizard mode?
You need two golden tickets
Quoted from romulusx:I know I’m repeating myself but is anyone working on a Wonkatania topper?I think I’ve completed my SE so I just need to crown it!
I have my own printed.
topper (resized).jpg
Quoted from romulusx:Sweet,and I really like the backglass lighting I wish JJP would just add at factory
Yes, that is not understandable.
The LED strip costs a dollar, and the camera cover so that the light is not reflected 50 cents.
Quoted from Freakyguy666:Why the extra “M” after 10A.M.?
The design is not mine, make a new one with the date of birth or LE number of the pinball machine.
This was just a test print of the size.
Quoted from pascal-pinball:did you made it yourself or did you bought this as a complete mod?
Because of the many asks a short explanation.
What is needed:
LED Stripe 12V, I prefer warm white.
Soldering iron, shrink sleeve, some cable.
LED dimmer who wants to control the brightness necessarily, there is also a radio version.
Some cardboard to cover the camera.
I do not use the original stripe, as it usually does not match the color of the new lighting.
Since my stripe was not isolated at the back, I stuck it on the metal tape underneath
Execution:
Measure the stripe, cut it, solder the cable and insulate with shrink tubing, glue and connect to the old connection of the lighting.
Always pay attention to plus and minus.
I assume no liability for damage.
Greetings Peter
Quoted from romulusx:Do you have a short video of topper in dark room?Im thinking of getting one for my SE
Unfortunately I don't have an old video, in the original it is much brighter than the pictures show.
A few leds scroll in the waterfall, not a particularly big effect.
The brightness is very disturbing, and all colors are washed out.
The topper no longer dazzles with the film and the colors are strong.
The second picture is with Color foil
Video with foil.
Quoted from Gumby510:I had a brand new drive that I tried, it’s not a ssd but I got the same results when trying to load the full install on it. Does it have to be a ssd I don’t want to go out and buy another and get the same results.[quoted image]
I'm not sure if a new SSD works.
if you read point 10 here,
http://marketing.jerseyjackpinball.com/sw/beta/jjp_wifi_beta_terms_conditions.pdf
then it does not work so easily with the new installation and you need an New SSD from JJP.
I made an image with Arconis (Full Image Backup), the new SSD was not running.
That's why I didn't register for the update beta test, it was too dangerous for me.
No idea how JJP protects the SSD so that nobody can access it.
Quoted from pascal-pinball:has anyone made a plastic to put on the right ramp?
I have an original one from JJP, but it's very big.
Quoted from Seatmandan:Not seeing anything in the release notes for update 1.33 to control the brightness of the Wonkatania topper.... Anyone know if they are working on it??!?
No, unfortunately, no setting option.
I use foil, which also helps the colors.
https://pinside.com/pinball/forum/topic/wwcf-club-wonka-golden-tickets-inside/page/79#post-5419747
First failure today.
The upper pinball finger didn't work.
Was probably just the fuse, no damage on the fuse to see.
However, the measuring device shows no continuity on the fuse.
Quoted from suave84:Anyone making interactive under cabinet lights yet for Wonka?
I don't think that works with a normal wonka.
This can only be activated in the menu of the CE.
How should you activate this without changing the software.
Quoted from bigd1979:Kits can be made for any pin and tied into whatever you want. Rocks custom makes great under cab kits that can tie different colors into different things... super neat...
I understand.
They do their own light show.
thought it was about the original.
I'm excited to see how well they'll do it.
I really liked the AC / DC.
Quoted from bigd1979:Someone makes the big points decal... it was on prototype wonka"s.
[quoted image]
I just printed something on paper.
Not perfect, but better than the empty hole.
Quoted from judremy:Can you share the image so others can print it? What kind of paper did you print it on?
I printed on plain paper and then laminated.
The image comes from the Internet and is protected by copyright so that it cannot be passed on.
Unfortunately I don't know the source anymore because I had saved the picture a long time ago.
However, there are innumerable candy pictures on the net
Quoted from jeffro01:My only question here is when you say it's spec'd not to have foam, where are you getting this specification from?
Jeff
My wonka has no foam on this target in the original.
Attention, first secure the loose ball at the top (cloth) otherwise it will fall out to the rear when the target is removed.
You're currently viewing posts by Pinsider agima2000.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/wwcf-club-wonka-golden-tickets-inside?tu=agima2000 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.