I'm not getting my machine back until after CAX, but if you still haven't found one by then: I'll try to take it off and scan it for you. Maybe you'll be able to repro it with some lexan and some paper.
You're currently viewing posts by Pinsider sosage.
Click here to go back to viewing the entire thread.
I'm not getting my machine back until after CAX, but if you still haven't found one by then: I'll try to take it off and scan it for you. Maybe you'll be able to repro it with some lexan and some paper.
Okie-Dokie...
Took a break and went down to where my machine was on location. Took the plastic out. Scanned. Put it back in. Came home and messed around with creating a vector version really quick. So you have two versions to mess with (technically 3).
On my version, I am not positive I have the size correct, but I won't know until you print it out and compare it. Should print on 8x11. Two sizes on that one page. A super quick rough measurement of the plastic showed it was about 8x2
Raw scan here:
http://www.drunkentemple.com/royalrumblepin/royalrumblePlastic.tiff
My version here:
http://www.drunkentemple.com/royalrumblepin/rrplastRepro01.pdf
Hope this helps. Good luck.
You're currently viewing posts by Pinsider sosage.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/wtb-wwf-royal-rumble-plastics?tu=sosage and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.