Revenge From Mars
Bally, 1999I just discovered that I'm missing the entire switch and mounting assembly for my RFM drop target. While I could probably assemble the switch and cable/connector, there's 4 or 5 other parts for the mounting bracket and backing plate that I can't locate.
Anyone know of a source of the assembly or parts?
if pinball.co doesn't have them (pinball spare parts australia), I would check with rick @ planetary (PPS here on pinside). give him the part no.'s and the page no. from the service manual for reference
Quoted from wizzardz:which way does the diode band face?
Micro mini switch with three lugs, two kind of close together and one alone farther away.
Two close together - outside one gets white wire and what ever color stripe and black end of diode, middle one gets green wire and what ever color stripe, far one gets silver band end of diode.
LTG : )™
I might add -
Micro mini switch with three lugs, two kind of close together and one alone farther away. They are usually marked NC for normally closed, NO for normally open, and C for common.
Two close together - outside one ( NC ) gets white wire and what ever color stripe and black end of diode, middle one ( NO ) gets green wire and what ever color stripe, far one ( C ) gets silver band end of diode.
LTG : )™
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/wtb-rfm-drop-target-switch-assembly and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Just South Of The Middle Of Nowhere, MS