Lethal Weapon 3
Data East, 1992You're currently viewing posts by Pinsider mikat11.
Click here to go back to viewing the entire thread.
This topic is linked to a classified ad.
The Ad Listing has been ended, so this topic closed automatically.
This is what you need. Wolo brand light made in the USA. Forget about those cheapo Chinese lights. Available on ebay. I've used one for a couple years with no problems. Just cut the plug connector off and slice it into the existing wiring on your game and use a 1 amp slo blo fuse. VERY IMPORTANT!! Take the automotive bulb out and use a 89 flash lamp bulb. The auto bulb draws too much current and blows the 1 amp slo blo fuse
Yea just cut the plug off and splice into the game wiring. Brown/blue wire from the CPU board at Cn12 pin 7 and grey/blue wire that is about 18v lamp power from power supply at CN4 pins 6 or 7. Install a fuse holder if needed. Those Wolo lights have magnetic base. I glued a couple washers to the backbox to secure it and can easily remove it. Velcro would probably work too.
You're currently viewing posts by Pinsider mikat11.
Click here to go back to viewing the entire thread.
This topic is linked to a classified ad.
The Ad Listing has been ended, so this topic closed automatically.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/wtb-lethal-weapon-3-pinball-topper?tu=mikat11 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Greenville, OH