Thanks so far !

2 martians would be great. PM sent.
**BUT** Come on jake35: 2 years ago you offered me tons of stuff for BBB at the end you never came back to my PM´s, never called a price, never answered. So I have no idea why you never replied and I will not start that from the scratch: You offered also dancer dolls, 2 green tubes ... etc, pp ....
I will come back to you with this 2 years old communication.

Plastics, thanks Pinhead1982 will see if I find a PPS repro-set.
Plastics on PPS are sold out like most of the other stuff. So far they have right wireramps and translites.

Yellow tube and left to right wireramp would be a dream.

I can help out with stickers if you have something to swap / sell me ...

7498bd3098a8da996cde6a58a40013ff4003e3e2 (resized).jpg

Thanks Jake !

The long yellow tube would be great, a coindoor decal would be also fine.
The long purple wireform was long time ago available at PPS. I started looking for parts 2017, they were already sold out.

Boards are same as from other capcom machines expect the board for the El-foil/black light in cabinet. A friend of me redesined them ... fully working. He also introduced them here on pinside. If any request i like to give the contact.

Aliens .. I have already 3D printed Aliens, originals would be great.

Thank you, lockdownbar is standart Capcom and no need for a spare.

I have no idea what this chip is for.
But I know that all pcb´s from Airborne fit in BigBangBar. Only more complicated pcb is the elfoil/blacklight pcb and the motor pcb due it has a programmed pic on it. But a standart emi-board with motorbreak will work also.

Still looking for right main wireramp, long tube on left side, green dancer (have only a blue repro).
I might have an elfoil to swap left.

Looking forward on my "hunt for parts" !

@mistermoberg
Yes, it is possible to convert a harness from Airborne but you have completely to separate all lines: Lamps, Switches, Coils/Flasher and you will need more.
On pinballsparepartsaustralia.com you can get wires for small money and also used wiring harnesses from WMS are helpfull.

I never said I made one

However .. so far : many people contacted me or wrote in this thread but the truth is .. nothing.
One offer for plastics but more expensive than a repro set (IPC) from a shop.

All other talking and writing: Aliens, tube .... nothing.

Maybe someone really has some parts and will sell them.
I am only really in need of a yellow tube and the aliens , the long wireramp.
All other stuff would be spare.

Thanks for your time !

Other story:
After I bought 2 El-Foils for 180 EURO each and destroyed one, I have a firm which can remake them. But needet to order at least 25 pieces. if someone wants a El-Foil arrows , just let me know. Price will be under 100 EURO !
In the net you will find them for several hundred dollars ....