Hi ,
Hunting for a few small parts for a WPC/ Pin 2000 era coin door. Looking for a micro switch and its mounting screws/nuts. The micro switch the coin triggers as it falls past. Willing to get a well used coin door for parts.
Thank You
Andy
You're currently viewing posts by Pinsider alimerick.
Click here to go back to viewing the entire thread.
Hi ,
Hunting for a few small parts for a WPC/ Pin 2000 era coin door. Looking for a micro switch and its mounting screws/nuts. The micro switch the coin triggers as it falls past. Willing to get a well used coin door for parts.
Thank You
Andy
Thank You.
Not sure what size screws and nuts are I think 2-56 x 1" long?
Thank You for link to switch.
Found williams parts catalogs online at Planetary pinball.
Looking in those coin door is listed as one part made by entropy. There are diagrams of the different doors. They do have lists of parts and show the micro-switch screws but give no size. There is one refererence to the nut in one of the door diagrams only. Shows as 4-40. Ordered 4-40 1" screws and 4-40 nylon keep type nuts from Marco. They fit fine but are a little bit longer than the originals. Also Bay Area amusements has the correct micro switch for WPC/P2K. Hopefully this will help some one else looking.
Andy
You're currently viewing posts by Pinsider alimerick.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/wpc-pin-2000-small-coin-door-parts-wanted?tu=alimerick and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.