Getaway: High Speed II, The
Williams, 1992Hey Guys, I need a little help here. I'm hoping to re-pin this J115 on my WPC Getaway. I have no lights on my back box or coin door. The top pin appears burnt. My problem is the wire waves in and out. Is there a way to utilize the molex I already have or do I have to order specific molex for the connector?
Image-2 (resized).jpegYou could try one of these.
https://wirebot.xyz/products/wpc-transformer-to-gi-secondary-wiring-harness
Hope this helps
Quoted from Pablito350:You could try one of these.
https://wirebot.xyz/products/wpc-transformer-to-gi-secondary-wiring-harness
Hope this helps
That wiring harness might work nicely.
Quoted from Da-Shaker:That wiring harness might work nicely.
They doubled up on the pins on that connector to save on wire. 1 wire fed 2 pins. The harness above runs a separate wire to each pin.
I was able to fix a portion of the lights by jumpering the green wires. A trace was broken. The rest will probably be fixed by the new harness. I reached out to the company and they said they make a specific harness for Getaway. The one pictured is slightly different. Thx for the suggestions. We’ll see if this works.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/wpc-j115-re-pin-help and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Grass Valley, CA