I just ordered my RR. Still waiting for it to be delivered. I would like both the witch and monkey mods. They look great!
I wish I had the ability/talent to create stuff like this on my own.
(Topic ID: 170798)
Linked Games
Iron Maiden: Legacy of the Beast (LE)
Stern, 2018-
Iron Maiden: Legacy of the Beast (Premium)
Stern, 2018
-
Iron Maiden: Legacy of the Beast (Pro)
Stern, 2018
-
Wizard of Oz
Jersey Jack, 2013
-
Wizard of Oz (Yellow Brick Road LE)
Jersey Jack, 2019
Topic Gallery
You're currently viewing posts by Pinsider LukyDuck.
Click here to go back to viewing the entire thread.
Quoted from bobukcat:Do either of you know what LE number you are getting? Just curious.
Sorry, but no I don’t know what the number is.
I don’t know much about the quantity of any of the models. But from what I have been told, they are supposed to be part of the original 1,500 (?). It sounded like a small production run was made and shipped to distributors without distributors knowing they were coming.
There were still some available last week at two distributors I am familiar with.
Quoted from Hoss_Coog:Here's a picture of a recently delivered RR that isn't numbered.
https://i1.pinside.com/2/bd/2bd6198074d70d5ffeef3a513943d10962a6c75f/resized/740/2bd6198074d70d5ffeef3a513943d10962a6c75f.jpg
Does anyone know if there is a difference between the numbered and none numbered versions?
Quoted from Hoss_Coog:From what I understand, the only difference is not being numbered.
Thanks...I guess I paid extra to have them remove the number! lol
Quoted from bobukcat:Well the numbered RRLEs are really just a numbered sticker for the apron that you can choose to install or not, the serial number label does say RRLE but doesn't list the LE number. Oh and the back of the backbox was signed by Jack (at least on mine, not sure that was all of them or not).
Thanks for the info. I guess I will have to wait and see what I end up with.
Just received my new RR. I would be into purchasing both the witch and monkey if they are ever available again.
Quoted from Daditude:What...no mod 2.5??
I don’t understand the question. Newby here
Quoted from PinMonk:He's talking about the $200 OZ rollover lane mod Lior is doing:
https://pinside.com/pinball/forum/topic/woz-new-oz-lanes-by-steve-gouveia-amp-lior-rajwan-list-open
Ah I know the one your are talking about. I need to relook at it. It initially didn’t grab me as much as the witch and monkey mods. I have a lot of looking around to do concerning mods. I have no idea what is out there.
Quoted from hawkmoon77:I just wanted to take a minute to let everyone know how well my witch has held up. I installed it 2 years ago, and a thousand or so plays later (with some pretty substantial air-balls from time-to-time) and the witch still looks flawless. I recently compared it against a picture I posted here 2 years ago and you wouldn't be able to tell the difference -- it still looks brand new. When you see something so intricately designed and painted as these mods, it's hard to think of them being as sturdy and long-lasting as they are.
Oh, and not once has there ever been a stuck ball!
That is good to hear. Now I just wish I could buy one for my new RR.
4 weeks later
Quoted from J_Striker:Ok, I did this for Steve in doing whatever I can to help him out on his monkey production since he said he was going to fill spots with the waitlist off his official list (and hopefully to get pity monkey for myself haha). I started after the last person who made the list (BigT) and started the waiting list going post by post. I was looking for official requests and if I missed you I am sorry. If you think you are higher up on the list or whatever, please don't PM me.... I am just trying to help Steve out the best I can.
If there is a ? and a post # then I was unsure of your request, seemed like you requested earlier and I didn't see it or maybe you were possibly requesting on another list or something. Ill let Steve look into those himself.
1. Franking1302
2. Armouredhobbit
3. Radius118
4. sdup4fun
5. Dexter
6. paynemic
7. RTS
8. mtp78
9. Scootie
10. triplecdad
11. LT4play
12. indypinhead
13. KingBW
14. jazzmaster
15. Lebron44
16. Fozzybear
17. Crile1
18. Gotfrogs
19. Wildbill327
20. Keys88
21. WesleyCowan
22. Cantabkiwi
23. harryhoudini ()
24. Bartzenegger
25. JohnMooch
26. J_Striker ()
27. Jetson
28. taz16
29. Colywobbles
30. jedimastermatt
31. pinheadpierre
32. lurch
33. Tonyscoots
34. knee
35. Rick432
36. Kenz
37. Sewerurchin (confirmed his request)
38. SDTMinSTL (#2017?)
39. RPZ
40. Richiewrench
41. f2honda4me
42. Fizz
43. mlboom
44. amused_to_death
45. capguntrooper
46. wcbu64
47. thanhdlam1985
48. yort
49. Nihonmasa
50. pballjunkie
51. ronaldvg
52. mjfisher
53. chitownpinball
54. teknotoyz (#2144?)
55. Daditude
56. PinJim
57. Mcsirtuna
58. Homebru (#2568?)
59. Hoss_Coog (#2589?)
60. darkryder
61. LukyDuck
62. drjeff112 (#2826?)
63. thanhdlam1895
64. Kenz
65. Killerbooger
Thanks for including me. Although at #61 I don’t think I will ever see one. I would also like the witch mod if it is ever remade or v2 is produced. I am loving my new WOZ RR!
3 months later
Quoted from 27dnast:Alright then. Let’s start a list.
1. 27dnast
1. 27dnast
2. LukyDuck
3.
Quoted from Yelobird:So thats the official Gouveia announcement!!! I'm in!
1 Yelobird
lol
1 Yelobird
2. LukyDuck
1 week later
I am in on the crystal ball mod.
Edit-Just wish my RR had the witch & monkey mods! Patience is all I have at the moment.
1 month later
I have the crystal ball mod and used glue from a hot glue gun to attach the ball to the mod. I had to do this shortly after receiving my RR because the ball fell off.
I like the hot glue because you can easily remove items in the future, if needed.
If anyone ends up installing a monkey mod light in a newer RR (2019), the connector in the RR is a 3 pin connector going to the topper. You will not be able to use this connector. Instead, you can use the back box led strip light connector. It is the same 2 pin connector that the monkey mod light strip uses.
Just thought I would let people know they are different.
Here are some pictures of the 3 pin connector (newer RR topper connectors) and the connectors I ended up using for the monkey mod led light.
You can still run the wires per the video instructions. Just make sure the wires are to the right! And not left. 
Funny that everyone kept saying to keep them to the right, but all of the video shows them going left!
BA60E323-F535-4729-B55F-9EB44B4CC8A2 (resized).jpeg275B3FDC-C36A-4237-9D76-27D42E8DEB2C (resized).jpegBB9AFB75-AF18-461C-BF39-1A44ADBEC37C (resized).jpeg4BEE0260-9E7E-4F22-961B-0DF787541B1D (resized).jpegE43A722E-B124-4710-B8AF-91E1A0B8CBCE (resized).jpegAnyone ever notice that Steve’s Crystal Ball mount is shown in the status screens?
I noticed the mount in the video when checking my status after I installed the mount. Pretty cool if you ask me. They go well together!
Nice work! Now I can actually see all of the video I was missing. And I always had trouble with the original mount and ball touching the wire form ramp. Now the ball sits higher like others have stated and clears the ramp.
Now, I am patiently waiting for the new witch mod!
19E9D492-B0C6-4A0C-A755-0A604C4D477A (resized).jpeg8C29517A-D939-4DD5-983B-48E735DEEF72 (resized).jpegQuoted from gouveia:Keeping busy.
Please stay safe everyone.[quoted image]
Nice! But that is not a witch mod! 
Quoted from titanpenguin:you really need to get rid of that witch in a fishtank mod....... lol
I plan on it! Just waiting for witch 2.0 to arrive on her broomstick!
2 weeks later
Quoted from gouveia:Hello everyone! I hope you are all staying safe and healthy and relatively sane. The sun came out a few days ago, so I finally had a chance to finish painting and clear-coating all these little guys, so... the list is officially done! I'll be contacting those of you still waiting and hopefully getting the mods out to you this week.
Thanks again for your patience and interest in my work.
Steve
[quoted image]
Nice line up!
Quoted from titanpenguin:So what’s next?
The Witch 2.0 should be next!
0. MEEEEEE
1. The Boob
2. rai
3. Jorant
4. HarryReimer
5. ViperJelly
6. wcbu64
7. wesman
8. LukyDuck
9. 
He does not even have a product to show and people are already lining up online. Soon he will have tents pop up outside his house with people waiting to be the first one to have a witch.
Who said witches are not loved?
His witches are like iPhones...people cannot wait to buy the next version.
You know, I have one simple request and that is to have Witches with freakin laser beams attached to their heads!
Quoted from meSz:Somehow I was removed from the list....was #19
1. The Boob
2. rai
3. Jorant
4. HarryReimer
5. ViperJelly
6. wcbu64
7. wesman
8. LukyDuck
9. Smiley
10. Yelobird
11. Manimal
12. Fizz
13. ToucanF16
14. Pinheadpierre
15. Pcpskate
16. Calfdemon
17. JediMasterMatt
18. edcianci
19. Chosen_S
20. etnfrd67
21. Titanpenguin
22. skogen75
23. fnosm (2)
24. Bantam
25. MJS2
26. ckpinball
27. Rlslick
28. homegameroom
29. Viperbsd
30. paynemic
31. mjfisher
32. cyber
33. Homebru
34. bobukcat
35. FalconDriver
36. SewerUrchin
37. aslong132
38. Thot
39. meSz
Why don’t you take the #9 spot? Smiley does not exist! That should make up for the confusion/typo. Think of it like the stock market...start at #19, drop to #39 and then gain back to #9! They all end in 9 so it sounds like a match.
1 week later
Quoted from Teknotoyz:Without having read every post as I’m sure it has been covered. What glue is best for this?
If we have the first witch mod, what is the story on the second? Another run of the same? Or an update? Hoping if it’s an update that there may be a cheaper option for those with the first...
I used glue from a hot glue gun for my crystal ball mod.
Witch 2.0 has yet to be revealed. Supposed to be an improvement on Witch 1.0.
2 weeks later
Quoted from Jenkins:Lest I miss out on the new-improved witch....I'm IN! Even if she doesn't shoot laser beams from her eyes!
1. The Boob
2. rai
3. Jorant
4. HarryReimer
5. ViperJelly
6. wcbu64
7. wesman
8. LukyDuck
9. Smiley
10. Yelobird
11. Manimal
12. Fizz
13. ToucanF16
14. Pinheadpierre
15. Pcpskate
16. Calfdemon
17. JediMasterMatt
18. edcianci
19. Chosen_S
20. etnfrd67
21. Titanpenguin
22. skogen75
23. fnosm (2)
24. Bantam
25. MJS2
26. ckpinball
27. Rlslick
28. homegameroom
29. Viperbsd
30. paynemic
31. mjfisher
32. cyber
33. Homebru
34. bobukcat
35. FalconDriver
36. SewerUrchin
37. aslong132
38. Thot
39. meSz
40.VegasAlleycat
41.Jazzmaster
42. Jenkins
Hey...the list is back! But I am guessing there will be a 2.0 list someday.
Quoted from Daditude:People love lists in this thread. Real, fake, duplicates, etc.
Personally, I'm waiting for the monkey mod list.
Maybe if you start the list...the monkey’s will come!
Quoted from Daditude:Believe me, I've tried! Lol
I have no doubt that a monkey mod list would fill up with willing buyers almost instantly.
Well, if the list is LONG enough, maybe he will make more! After Witch 2.0 and his other creation he will reveal before Christmas!
1 week later
1. Boob.
2. rai
3. wesman
4.Titanpenguin
5. meSz
6.Gouveia
7. LukyDuck
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27. 27dnast
Quoted from Fizz:A list that I'm not on? This is a travesty.
I'm jealous of everyone on the list.
1. Boob.
2. rai
3. wesman
4.Titanpenguin
5. meSz
6.Gouveia
7. LukyDuck
8. ToucanF16
9. JediMasterMatt
10.pballjunkie
11.Bmanpin
12.VegasAlleycat
13.ViperJelly
14.etnfrd67
15.skogen75
16.calfdemon
17.Manimal
18.
19. Pinheadpierre
20.
21. Fizz
22.
23. sonambulo
24.
25.
26.
27. 27dnast
28.
29.bajm
30. Chosen_S
97.6238 Merccat
Here you go! I added you to the list. You are part of the group now. No more jealousy. 
Quoted from Fizz:Thanks LuckyDuck, I feel so loved now.
But then I saw Boob's post, and Groucho has a solid point.
So now I'm jealous of everyone not on the list.
54792FAD-A57B-4C2F-AFF1-2CC938CCFB4E (resized).jpegB924AB45-1520-4D02-BA1C-5F552A7EFE3B (resized).jpeg 3 weeks later
Quoted from Daditude:How much of a chicken-bribe would it take to bring back the monkey mod?
I would ask...how many chicken franchise’s are you willing to give up?
I hate to agree with meSz, but Steve has told me in pm’s that he never plans on making any more. He has two current projects, Witch 2.0 and another one I am not sure I am at liberty to discuss, that are going to take up a lot of time to complete. Sorry 
I would keep my eyes peeled for one for sale or put up a wanted add on pinside. I know there is always someone that has one in a box and never installed it. Maybe, they will give it up. And you better be willing to pay the price. They are never cheap, unfortunately. Good luck. Or you could buy a machine with one installed, remove the monkey, and resell the machine.
New list “Game Changer Witch Mod”
1) 27dnast
2) Thot
3) Manimal
4) Yelobird
5) titanpinball
6) bobukcat
7) LukyDuck
8)
Quoted from gouveia:Or maybe a chicken smoking!
2F7605C6-0C02-4137-BE9F-8739E074266F (resized).jpeg 1 week later
Damm...you guys keep posting and are making me keep looking to see if there has been an announcement yet!
But I obviously have nothing better to do anyways! 
2 weeks later
1. Manimal
2. meSz
3. Wesman
4. Rager170
5.titanpenguin
6. skogen75
7. LukyDuck
8.
9.
10.
11.
12.
13.
14.
15.
16. calfdemon
17. paynemic
Quoted from Calfdemon:I am religiously #16 and was with Witch 1.0, flying monkey, and crystal ball and just about every fake list. How did I fall to 24 on this created fake list?
You can take my spot if it makes you feel better!
Quoted from mavantix:I'm terrified I'm going to miss out on 1 of the 50 too...pinside is probably going to block me for DoS attack from the page refreshing haha
At this point, I have the crystal ball and monkey. So I need the witch to keep my game rounded out. I hate the witch in the tube.
Quoted from Daditude:[quoted image]
That is a hard pass for me. Some things are just not meant to be together at the same time.
Quoted from MrMikeman:That’s weird. I counted 50.
Ha...so someone did spend their time counting the witches!
My alarm is set. My witch in the tube needs to go in the trash! And my monkey is waiting for its witch counterpart to show up. It is tired of just looking into its crystal ball.
Quoted from mavantix:I have my bucket of chicken and dozen donuts. I'm ready. I hope I can post fast enough to score one of the 50!
I am with you on getting one. My monkey will continue to be lonely if he does not get his witch 2.0! He needs his witch. Waiting for his witch is the only thing that has been keeping him going. Without it, he might stop going up and down due to loneliness! Now that would be a sad story!
Quoted from mavantix:I have the Monday and the Crystal ball, I need the Gouveia Trifecta, and to say goodbye to WitchTube once and for all.
We are both in the same boat then. Good luck to you! See you tomorrow online!
Man...this is as bad as trying to score front row concert tickets to your favorite band!
Looks like at least 75 buyers so far!
When you posted that picture...my mind went to RUSH 2112 and almost forgot about the witch! I like the price tag and HD details. Nice work! When is someone going to make a Rush pin?
Quoted from liorillusion:you are WRONG! its not taking him 20sec to make it. its take him almost a year to make the final version and production also takes a lot of time so who is in the wrong business?
if you will calculate Steve time + his cost its will be better to work in McDonald.
some time the view of people is really WRONG!
Hi liorillusion how is the Haunted Forest mod coming along? Any news to share?
Quoted from liorillusion:yes. there was license issue so im working on that. i will not make any trademark mods without license, and license can take time.
im not like others who trying to fly under the radar...
good luck to Steve with the production! if its your first mod you get from Steve you will be in shock for the quality.
Completely understand and I will be looking forward to it when it is ready/available!
Quoted from Kkoss24:What’s the next step
Wait for the PM/email with payment instructions. Remember to provide your pinside name when making the payment.
Quoted from 27dnast:Show us a video of it working on your game, Boob. We know!
Yeah, where is the beef I mean video of her?
If it is still possible to be added to the extended list, I would like to purchase a 2nd witch. Thanks
Quoted from fnosm:Ok,
This list is pretty clean. The previous list had a dupe and a few spelling and capitalization errors:
Let me know if I missed something. Total WCTD (Witch Count To Date) 104.
1. wesman
2. zutton1
3. audihere
4. paynemic
5. AliciaC
6. 1quartershort
7. Kkoss24
8. Homebru
9. avspin
10. Pinball-Lady
11. Fizz
12. Rennervision
13. skogen75
14. Chosen_S
15. LukyDuck
16. 27dnast
17. mjfisher
18. wvpinball
19. mavantix
20. eharan
21. Ramjet
22. tat2ist(2)
23. txx3ddq442
24. HarryReimer
25. jeffr
26. mjs2
27. bigbadmiker
28. Frogman
29. adborto(2)
30. ViperJelly
31. calfdemon
32. fnosm
33. Pinball69
34. monte_
35. Hoss_Coog
36. jedimastermatt
37. ulmpharmd
38. wcbu64
39. generalgman
40. Toucanf16
41. jhagen
42. homegameroom
43. aslong132
44. Viperbsd
45. titanpenguin
46. bajm
47. meSz
48. rai
^^^ 50 units ^^^
49. Pinzap
50. pinheadpeirre
51. thewool
52. waynetrane
53. Jenkins
54. Babnik13
55. scottr
56. ckpinball
57. RedLineMania
58. pballjunkie
59. SewerUrchin
60. Jvspin
61. Bmanpin
62. paragon07
63. Scottyboy369
64. Yelobird
65. AFM95
66. Ericpinballfan
67. RTS
68. Gooch
69. rzgrip
70. merccat
71. Parker09
72. yort
73. SLRage
74. bobukcat
75. PinBackpacker
76. Thot(2)
77. Oneangrymo
78. El_Tizzle
79. knightgdg
80. FalconDriver
81. beelzeboob
82. podolj
83. MGM2
84. ReadyPO
85. delt31
86. Kerry_Richard
87. Vyzer
88. Jackalwere
89. gatordad
90. wipinball
91. MrMikeman
92. BOB-G
93. etnfrd67
94. GreenWave
95. Pinbear
96. masterfx
97. fnosm (2nd one)
^^^ 100 Units ^^^
98. VegasAlleycat
99. LukyDuck (2nd one)
100. pcpskate
101. Whitenoise3000
Thanks for fixing my name. Can’t wait for the witch to arrive. My daughter loves playing WOZ and is going to love the witch. She already loves the monkey.
Quoted from thewool:Het Steve, is the new witch pointing at the player? I thought I saw a picture of this but now can't find it. Cheers.
Yes, Steve provided more details of the differences between 1.0 and 2.0 in this video, post 4322. It’s pretty cool.
Quoted from 27dnast:Does anyone remember... did the witch 1.0 come with printed install instructions or a video link?
No video that I am aware of. I cannot speak on instructions because I never had the pleasure of owning one. Yet!
Quoted from Yelobird:You are a Very kind person to do that. Hoping you didn't take my goofy poke for anything more then fun. Very kind bravo to you!!!!
You could move boob to the front of the line and I wouldn’t care. I have patience.
My experience has been that you always add your name to lists in this topic so that you never miss out on one of Steve’s mods. The day you skip the list will be the day you miss out. I missed out on R&M by not following this advice.
Quoted from Kkoss24:Yeah I couldn’t imagine how much time he has in these .Im very greatfull of his work as this mod will completly change the game from tube witch .Also Steve I hope you don’t mind me copying your tree tops .Im guessing just find something close to apple tree leafs at a pet store n glue gun to adhere .It looks great !!
Here is what I used for mine.
Petco sells one of them and Petsmart sells the other one. Same leaves but the flat one is cheaper.
A hot glue gun is all you need.
6DA61DD0-5C54-440B-ACA5-55974E70BFB5 (resized).jpegAB64C732-DC51-4CFE-837B-B81378148C77 (resized).jpeg
6F710DA9-AAB7-4FFD-B57E-F153F8F604DC (resized).jpegQuoted from Kkoss24:Thanks LD looks great !! WOZ is the first pin I brought home and will be the last to leave .I don’t think there’s another one out there where you have this many options to customize it to what you want it to be and a lot of that has to do with Steve !! I just joined the club and hopefully there’s more options to come .This last month or so have been a blast !
Mine was the third for me and will be the last to go. I am small enough that they could bury me in it. I wonder if that’s legal? This is also why I am installing the best mods for it. I agree with your comments.
1 week later
3 weeks later
Quoted from JosiahCox:Fuck, have I missed getting in on this again?
I finally get a RR WOZ and I hate that witch.
I have two slots reserved. If you would like my #99 slot, you are welcome to take it. Free of charge!
3 weeks later
I do hope that Steve does some GnR mods. I could use them for my new pin after it arrives! Hint hint
1 week later
Quoted from Kkoss24:#7 Kkoss24 reporting witch is en route!! I repeat which is en route!! Tube witch your days are numbered !!
Good to hear! I am #15 and cannot wait to get rid of the tube. Steve’s monkey picked up two balls the other day in my WOZ. That is one strong monkey!
Quoted from Kkoss24:Lol .Did it make it all the way ?
All the way to the top and tried to drag them both in. The second fell of course.
Quoted from fnosm:Just to clarify, the magnet is from JJP, the magnet hiding device decorated like a flying monkey is from Steve.
Oh man, you are taking the wind out of my sail! It never did that until Steve’s monkey was installed! I give the monkey credit for lifting two balls!
Quoted from jedimastermatt:It’s pretty normal for a monkey to routinely lift two balls - unless they been to the vet.
Touché
Quoted from Calfdemon:When the time comes (I am in the 30's on the list), I will be selling my 1.0 for $200 as well. I guess we will see if the demand lessens which may in turn drop the going price, but I don't think that will happen. There are not many of his witches out there and plenty of machines. There are lesser witches, but to each their own. Selling for the original $200 price is not gouging, it is fair and just moving the witch to a new home with no markup. Prior to 2.0 coming out, I saw several witches sell for $500 plus which is crazy!
Yeah, the monkey’s got expensive also!
Okay, I have to ask...Steve...you have to have thought about how many hours you have put into just creating the final witch 2.0. So...would you care to guess how many hours of work you put into its creation? I am curious as to how many you think it took. If you don’t want to answer, that’s cool. It’s just my math side of me wanting to know.
1 week later
Things I learned while installing my witch.
Steve mentions in the installation video to make sure the witch is not rubbing on anything. I checked mine and it was rubbing on the two silver metal brackets in front of the witch when it raised and lowered.
The bracket that the witch is screwed onto was slightly bent from the factory. Make sure yours is perfectly flat. Second, at the bottom of the bracket, there are two screws that hold the bracket to the black colored base. The metal bracket has two slots, not holes, that the screws thread through to hold the bracket to the base. I had to slide the bracket rearwards to keep my witch from rubbing. So the bracket is adjustable forward and backward.
Edit: also make sure the witch bracket stands up straight. If not, your witch might lean slightly forward or rearwards. It also might end up rubbing on something.
Lastly, once I had the witch bracket straight and adjusted rearward, the top of the witch bracket that her hat would normally screw into, would slightly rub against the flames and well wall. So I ended up bending the hat part of the bracket closer to the witches back to stop it from rubbing.
I would check that the bracket is straight when you have the witch removed. Since you will no longer need the hat tab, I would bend it ever so slightly towards the witches back. And lastly when installing slide the bracket rearwards so it hopefully does not rub.
Quoted from mavantix:Installed my new witch today. Adding to this, you do NOT need the plastic spacer included with the game, as it will push the new witch so far forward that the metal scrapes the paint off the witch and damages her. [quoted image]
I did try installing the witch without the spacer and the screw holes were not deep enough. So I decided to use it and was able to make the witch fit with it installed. Removing the spacer and making the screw holes deeper was my last resort. I forgot to mention this in my comments. Thanks for including them for others!
4 months later
Quoted from gouveia:Nice! Let me know if you need anything.
Winning lottery ticket numbers!
Okay, how about some better Munchkin Huts?
Quoted from gouveia:Hahaha. What’s wrong with the ones already in there?
They are as bad as all of the other items in my game that have been replaced by one of your mods!
The original items compared to your mods is like comparing a Yugo to a Ferrari!
1 week later
I bet when you are done with making the witches, you will be done with witches forever! I know I would be. Nice looking witches by the way!
2 weeks later
Quoted from Manimal:Got a box today. I wonder what it might be......
Hope I get time to install this soon....
[quoted image]
Be careful, it might contain mystery seeds from China!
Quoted from Manimal:Gonna be sad to see Witch 1.0 be put out to pasture...
She could be adopted by someone else and have a new home! Some child or adult will enjoy her. Even if she is a witch!
Promoted items from Pinside Marketplace and Pinside Shops!
Bee Branch, AR
You're currently viewing posts by Pinsider LukyDuck.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
