Wizard of Oz
Jersey Jack, 2013My WOZ Crystal ball VUK stopped working and I an looking for some help. The switch triggers, the coil reads over 4 ohms, and all wires are connected. Any ideas? Bad coil, fuse blown somewhere? I am all good on older machines but this one has me stumped. I am sure someone else has had this issue and appreciate any help in advance.
Quoted from Aflacjack:My WOZ Crystal ball VUK stopped working and I an looking for some help. The switch triggers, the coil reads over 4 ohms, and all wires are connected. Any ideas? Bad coil, fuse blown somewhere? I am all good on older machines but this one has me stumped. I am sure someone else has had this issue and appreciate any help in advance.
Have you checked to see if the voltage is getting to the coil? Could be a fuse if you have not checked them (F704 or F701?).
fuses2 (resized).JPGQuoted from Aflacjack:Yes I tried that. Nothing. I am thinking change out the coil and see
Have you checked the voltage at the coil with voltmeter?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/woz-vuk-help and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Bristol, TN