do you think this "Apc Automatic Voltage Regulator 1200VA" would fix the led freeze at Woz?
would be available here in Austria also
thanks
tom
You're currently viewing posts by Pinsider kapsreiter.
Click here to go back to viewing the entire thread.
do you think this "Apc Automatic Voltage Regulator 1200VA" would fix the led freeze at Woz?
would be available here in Austria also
thanks
tom
yes, my video is just a 3 Channel switch
its not a real fix, its a workaround
i hope we will get from JJP a fix soon
any news from JJP ??? a little quiet since some weeks
I hop the fix is comeing soon for the LED-FREEZE
Jack should post a Information here
for us.
still have freezes every day.
@ Taylor
How Long is thi s APC installed now?
days?
Did you have every day a led freeze?
please let us know.
regards
Tom
Quoted from TaylorVA:During the tournament I think the LEDs froze once or twice but since then I haven't had any issues.
Sounds not 100%
i am not sure if i should order one
they told us it is not nec. to replace all boards
only where the freeze starts, this should be replaced
in my case i replaced hounted and tinmann ( this boards are mutli led boards)
lets see what happens the next week.
too bad!
which ones do you have replaced?
tinmann?
haounted? hounted Looks like a central board to me
i have never seen that it recovers before
at my game the changed boards are not freeze again
but boards later in the data line
so the fix works, but it Looks like at some machines you have to swap more boards in others less
if the Problem starts
go into test menue and check where it starts
at my machine it starts at a Point in the line and all behind
check the manual at C-50 where you can see the diagram of the cables
with the new 3 boards the Point is now more behind in the line
sorry that is the only logic for me
could understand you hank!
i am also tired of swapping boards every view weeks
but no its the first time a swap makes it better
and the game is great
i hope my one is perfect in 1 week
Quoted from beelzeboob:I don't know how you ever actually have time to play pinball...
i have time
have to wait again for new boards with seriel filters
and they work after a power reset
if yes = freeze Problem, you Need a board with buffer
check which is the last working
if no = broken board
You're currently viewing posts by Pinsider kapsreiter.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/woz-led-issue-info?tu=kapsreiter and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.