The leds go crazy when a game starts flashing all the colors. You cannot see the lit shots because evert led is flashing all the colors When the game ends they go to the correct colors. Any help would be much appreciated!

Thanks flippyd I will start there. Unfortunately the warranty is up

It’s the ruby red version

Thanks guys I’m going to try all these solutions and suggestions I’ll get back and I will post a video thanks

Ok so I watched the lights during attract mode and the lights start lighting up normally and progresses through each led board until it gets to the last board...the one with “9” on it at that point all the other boards flash crazily except the last one it operates normally... any ideas?

When I go to tests and test the leds, I go to ALL LEDS and select white all the leds are white on the PF then when I try the other colors, all the leds go crazy on the PF except on that same board ( the one with 9) that board goes dark