It is missing the driver file for the light boards. Call Frank at JJP he will tell you what to do. You will have to reload the software to get the driver back installed. Not a big deal but very annoying.
You're currently viewing posts by Pinsider asoa.
Click here to go back to viewing the entire thread.
It is missing the driver file for the light boards. Call Frank at JJP he will tell you what to do. You will have to reload the software to get the driver back installed. Not a big deal but very annoying.
Ask to speak with frank there have been a few issues with the Ruby Reds with the 2.0 lighting system. when they switched computers and logic boards not a lot of issues just a small group of them. Had a WOZ RR with 2.0 light system that the driver software would get erased or could not be found it replicates this exact same effect. Not saying that is the problem however if it is it would be a quick fix with a simple call to frank at JJP. I'm not the best with proper terminology however if you reach out to frank he will explain far better then I can. In test there is a way to view system properties if it does not have the driver info displayed then this is probably your problem. Just trying to help.
You're currently viewing posts by Pinsider asoa.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/woz-help-lighting-going-crazy?tu=asoa and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.