This is quite a large thread and i know that the instructions im looking for are in here somewhere but i think just asking will be easier. I just recently picked up a WOZ ECLE and i know its not running the current 6.06 version of the software. Iv seen a video on doing the delta update but it looks like a full version install is what its going to take now to get my version up to date. Can anyone PM me a list of instructions or a good video showing full steps on how to set up the usb stick etc to download the full new 6.06 software. I dont want to make any mistakes and have something go wrong with the install because i missed a simple step somewhere. Thanks for your time.

Got 6.06 installed and working great! I know its probly just me but man rescue multiball seems a lot harder to get in the new software lol.

After i installed 6.06 i had to turn down the power on my crystal ball VUK. It was kicking the ball up and off the rail. Anyone else experience this after they installed the new software?

Also turned on my machine today and the screen ran fine but none of the lights on the play field were working. I gave it a few minutes but still nothing so i turned off the machine and turned it back on and wha lah everything worked again. Anyone else had this happen? If so is it just a common glitch or something to look into further. My WoZ only had 150 Plays on it when i bought it so i wouldn't think it would be anything electrical with it being almost mint.

My castle door switches seem to be registering while my ball is in play down on the main play field. Ill be playing my game and then all of the sudden i hear the crack of the axe for the castle doors and the winkie music comes on along with the blacked out rescue letters up on the screen for about 2 seconds and then in goes back to normal play. Any ideas what may be causing this? Running the most current 6.06 Version of the software.

Does anyone know if the switches on the double door mech are supposed to be compressed by the mech untill the ball hits the doors and letting the switch release? From what i can see without taking off the upper field thats what it looks like. my door mech is compressing the switch but just barley so when i flip the flippers or any vibration happens near that area im getting phantom rescue on the screen and door hits are registering. If thats the case does anyone know how to get the door to pull snug up against that switch? Do i adjust the spring or is there a way to actually adjust the switch. Machine doesnt have very many plays on it and just all the sudden started giving me the phantom door hits so i dont no what rout to go.

There is no arm on this switch. Its a little green button. Maybe i should just email jjp. Does anyone have a direct email to someone there who does game support stuff i could talk to and maybe get a description or steps to take for my issue?

well i played with my double door mech a little to see if i could stop my phantom door hits from registering. Didnt do anything major just played with the doors a little and it seemed to work but then i noticed every time the winkie target is down every time i would flip my flippers i was getting points and constantly being told shoot the castle and could hear like a clicking going on. Then i held the ball on my left flipper and it was nonstop shoot the castle yelling at me with tons of clicking sounds. i knew something was wrong and shut the game down immediately. Opened the coin door to smell hot/burnt wires...... i pray to god i didnt burn anything up. Going to have a tech come look at it here in the next few days. Does anyone know what could have cause this to happen?

I opened it up and the strongest scent was near the castle play field so we shall see. I just am wondering why it just spammed yelling shoot the castle at me and was giving me points and clicking while i was holding a ball on the flipper. Guess we will see

Hey guys im looking for some help finding a part that either is not listed in the manual i'm looking at or im just missing it. The magnet coil that works the drop target retraction mech in my WoZ has overheated and burnt out due to a silly loose connector from the factory and now i need to replace it because its blowing fuses every time it fires to retract the winky down. For the life of me i havent been able to locate a part number for that small magnet coil and i was wondering if anyone may be able to point me in the right direction. Thanks guys!