Wizard of Oz
Jersey Jack, 2013
Wizard of Oz (Yellow Brick Road LE)
Jersey Jack, 2019You're currently viewing posts by Pinsider sewerurchin.
Click here to go back to viewing the entire thread.
I've had my ECLE for months now and have only one real issue. The ball frequently gets stuck under the twister ramp switch. I have searched pinside and found a few mentions of this, but no further talk about it. My machine is level and the incline is in the common range.
Is the fix simply bending/adjusting the switch?
Should i raise the incline?
Quoted from Pinballomatic:Is your game a very early ECLE? A few made is out with a ramp post on the left that was 1/4” too short and thus the ramp doesn’t have the angle it should have and thus more ball hangups at the switch actuator. Other than that, yes it is a matter of adjusting the actuator properly.
Thanks for the info , I'll take a look. If I remember correctly my build was April 2014. Do you know the correct length I'm checking for?
Quoted from LTG:That can be tricky to adjust. Too fast and it might not read the ball, too slow and the ball can stick.
I thought of a magnet reed switch for there but haven't tried it yet. I replaced the switch with one with a roller on it like this :
https://www.pinballlife.com/williamsbally-ball-detect-blade-with-roller-sub-microswitch.html a tiny drop of light oil on the roller and spun it to work the oil in. This pretty much eliminated ball hang ups once adjusted a little.
LTG : )
Thank you! I will look into that option if I can't get the original to work properly.
You're currently viewing posts by Pinsider sewerurchin.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/woz-fan-club-members-only?tu=sewerurchin and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
San Jose, CA