Wizard of Oz
Jersey Jack, 2013
Wizard of Oz (Yellow Brick Road LE)
Jersey Jack, 2019You're currently viewing posts by Pinsider irishpin.
Click here to go back to viewing the entire thread.
Just received out 75th anniversary #1337 from the new run today. I have not yet un-boxed the pin. hoping I do not have any issues as other have had. Was told the monitor and computer on the latest "batch" of ruby red is mounted the same as the yellow brick road. I did find it interesting that the set up sheet that was sent shows the Wonka Machine on it!!! Anything I should look for when opening it up?
Quoted from LukyDuck:Funny, I just received my RR and I saw the WW instructions also.
Here is something I would do.
Turn off your machine and grab the backbox keys and unlock it. Slide up the panel and place it somewhere safe. Grab the monitor on both sides and pull forward. There are two strong magnets holding it in place. The monitor can be swung to the side of the machine. It’s on a monitor mount attached to the backbox. Double check all of the connectors to ensure they are flush with the board. I had a few that were not completely seated and gave me an issue. I also would look at all of the fuses and make sure they are good. The cables are really tight and some are pulling the bundles to one side or the other.
Check you plumb bob and adjust it. Mine was slightly off after I leveled the machine both front to back and side to side.
Wax the play field.
ENJOY IT!
Thank you for the advice, I will definitely do this. I cant wait to get it set up and have some fun. Thanks again!
Quoted from LukyDuck:Here is something else I would do.
Navigate to the Devices Test (i.e. Moneky test, house test, witch test, etc.) section of the game. Run them and make sure they work as expected. I had to adjust the spinning house in order to get the feet/legs to show properly. It took a bunch of time playing with the settings for it to work right. I am glad I adjusted it now so that I know it should work properly IF I ever get to that part in the game.
Got ya! A lot more going on with this sucker than our ghostbusters!!
So, I posted a while back about several problems I had with our ruby red we got last october. Round 2of the WOZ demon, went to turn on the pin this eve, hums, and no boot. Took off back glass, red lights on board, no fuses blown, now what...... Checked fuse on power supply, all good. even change outlets on the wall, nothing. Any thoughts on what to look for? Just want this thing to work 100% for once........
Mike
Quoted from Oneangrymo:Man I’m having a hard time removing back glass to access the back box , don’t u just turn the key and lift the translite up ? It doesn’t even budge any help ?
The back glass on our ruby red is a very tight fit. Had to tap it while trying to remove it to get it loose. When reinstalling, had to really work it/make sure the glass was all the way down to get the lock to engage properly.
You're currently viewing posts by Pinsider irishpin.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/woz-fan-club-members-only?tu=irishpin and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Oconomowoc, WI