Anyone have a set of green ECLE side rails they might sell?

There was some damage to my game today, and the rails bent during a sudden shift and force on the cabinet. You can see in the pictures they don't line up with the back box. You can also see the bend.

I was thinking of trying to take them off and just bend them back, but someone suggested I try to get new ones because I won't be able to bend them back without leaving a lot of marks. Any thoughts? If new rails are called for please send me a message if you have any. I did leave messages for JJ today but figured I would ask here as well. Thanks.

IMG_1674 (resized).jpeg

IMG_1675 (resized).jpeg

60884581527__AABC05B3-1BA3-4646-9160-1282B1BB5AC3 (resized).jpeg

60884583013__3EB176A8-6236-47BA-8DC4-BB5C16FBE37D (resized).jpeg

60884587291__8B83CA21-6E8D-4751-ADAB-3329781E0E9A (resized).jpeg

IMG_1676 (resized).jpeg

IMG_1679 (resized).jpeg

Thanks for the suggestion. It’s a bit tricky to get them off. I think I will need to get a new set.

Anyone have an extra set of green side rails they would sell? I got a response from someone yesterday followed quickly by a warning from pinside it was a scammer whose account was deactivated.

Thanks again.

That’s awesome! I hope to talk with them tomorrow.

Thanks so much. I reached out to JJP, and they might not have the rails. They will let me know, and I will keep this link handy in case I need to go the powder coating route. Thanks again.

That's awesome to know. I've been in touch with him already this morning. JJP is out of ECLE rails, so I am hoping Robert can make my game look good again with some new, shiny, straight green rails.

Has anyone had an issue with the shaker whining or squeaking? I went through some old posts on pinside and found a recommendation by Lloyd to use light oil to fix it. Just curious if anyone has done that, what they used, and if it worked. This is on a factory shaker on a WOZ ECLE, by the way. I welcome any thoughts. It just started whining/squeaking the other day.

Thanks for the input. Can you recommend a few light oils? I'm just not familiar with what to get. Thanks again.

I have noticed some light issues with the WOZ ECLE I bought a few months ago and just wanted to ask if anyone has seen this before. I got the game from a great local pinsider who has been really helpful as I learn more about the game. He let me know that the light boards are the 7.5v un-buffered version. He said that over the last 6 years he blew 3 light boards (roughly 3 to 4 years ago), which were replaced with the 7.5v buffered boards. He noted no issues since then.

Last night I was playing a few games, and the lights looked a bit dimmer across the playfield. When I got to Toto Escapes, there was some faint yellow/white lights on the playfield, which I have never noticed before. There never seemed to be any lights on except for the flashing white indicating the Toto ramp shot. It all played fine, just seemed a bit weird.

Also, sometimes when the game is in attract mode, sitting idle, the lights on the playfield are the usual colors. Another day I have it on and they are the florescent type seen in the Lights On Crystal Ball mode. Is that typical?

Thanks for the help. I'm still getting used to all the game has to offer and just want to make sure things are as they should be and that I am not having any light board issues.

Lloyd, I finally got around to putting some 3-in-1 oil on the shaker where you suggested. Unfortunately, I still get the high-pitched squeaking/whining sound. I get that same sound even if I just manually move the shaker around a revolution or two. Any other thoughts on what I might try? Thanks.