who's selling one??? I'm looking.
(Topic ID: 87617)
Linked Games
Wizard of Oz
Jersey Jack, 2013-
Wizard of Oz (Yellow Brick Road LE)
Jersey Jack, 2019
Topic Gallery
You're currently viewing posts by Pinsider ccbiggsoo7.
Click here to go back to viewing the entire thread.
2 months later
Quoted from moonduckie78:I AM pretty pissed at the distributor, but I honestly don't believe they intentionally lied to me. I think the person who took my order over the phone just couldn't be bothered to double-check with the warehouse to make sure they gave me the one I wanted. She just took my order, and the warehouse just grabbed the closest one. I just got really mad at them when I wrote to them about the issue, and the same lady now told me they have no control over which box I get....then she tried to tell me the date isn't stamped on the box (BS!) and it doesn't matter anyway because the one they sent me (build date 11/10/16) is the latest build. I showed her the page from the WOZ Manual about the 2.0 Lighting System and the 12/15/16 date.....I told her she had no reason to know all that but I DID and that's why I specifically stated I wanted to purchase only a newer one, and that's why I'm very upset, because the one they sent me, which I didn't want in the first place, is a complete and total LEMON! Haven't heard back from them since that. Yeah...I won't be purchasing anything from them again. Sigh.
then they should fire her butt!
3 months later
Quoted from fnosm:The lighting kit from Pinballbulbs lights the game nicely. The original lighting was insufficient to play in the dark, IMHO.
pics?
7 months later
1 year later
Quoted from kidchrisso:I purchased mine almost 3 years ago direct from Jack. I was able to nail down with him #1939 (year the movie was made). To my knowledge this is the only one over the number 1500.
I got #39 for the same reason.
8 months later
10 months later
Quoted from Pinballomatic:JJP has them
i went to website, under parts and woz, nothing there.
1 month later
woz started acting up tonight, turn it on, boots up fine but start button and doorlock buttons are all dead. any suggestions?
7 months later
Quoted from pinballinreno:My ECLEWOZ has a true backglass.
Did they made any translites for it?
You might get a backglass from JJP if yours is broken.
id take either, jjp has no parts for hardly anything they made. kinda sad.
3 weeks later
game is dead in the water. tried reset, jump pins, etc. sent a message to jjp help desk, said to try to reset bios and replace battery. replaced battery but have no idea how to adjust bios in the game. anybody got any vids or illustrations on how to do this?
Quoted from Vyzer2:Ccbigsoo
Hopefully this attaches properly. If you need to jump your cpu, this you tube video by Butch Peel is how you do it.
yeah, tried all of this like 10x, still nothing.
Quoted from pinballinreno:Bios is easy.
Just set it to ignore all errors and restart normally on power loss.
But you need to attach a USB keyboard, to the back of the computer, to hit F1 or to get in for adjustments.
Does your screen come on at all?
Is it completely dead, no power, no lights?
screen just says no signal and got about 6-8 playfield insert lights on. don't think hooking a keyboard to the screen is going to work out. its dead.
2 weeks later
2 weeks later
Quoted from attitude05:I had a similar issue with the power supply went out on mine and took out the main board, the processor, and the Ram. After trying to piece everything together and test I finally just ordered a new board from JJP and everything came back to life. Yes it’s a price that I didn’t wanna Pay but it took less time to install and get everything back up and running.
so how much was the mpu board? thought mine might of been a power supply issue, but after trying a new one, still nothing. damn game has 200 plays on it.
2 weeks later
woz is dead..... started talking with jjp to see what to do, and since around halloween haven't been able to get a response back. he asked me to send pics of the mpu, which i did, then ...nothing. been at least 2-3 weeks now. 2 emails from me with no response.
Quoted from RobbyIRL5:What’s wrong with it, just no power? Did you do the jumpstart, which is common in JJP’s I believe. You have to bridge a jumper with a paperclip if I recall properly.
yeah that did nothing
Quoted from attitude05:Have you replaced that power supply?
tried new power supply, jumped pins, now mpu fan will kick on, but with jumper only, and still no signal to screen.
1 week later
Quoted from attitude05:That’s what happened to mine. I had the power supply go out, and take out the motherboard CPU and RAM. I replaced everything in the game runs perfect now. The staff at JJP took very good care of me.
i wish i could get them to take care of me, instead of repair replies once a month....... at this rate, maybe i'll have the game up and going by 2024. crickets for over 3 weeks now. 
anybody put a new power supply in the ecle, ive tried 2 different models (one same kind) as original, but plugs don't match up. seems jjp has some jumper wires in machine?
4 months later
anybody have issues with the doors not opening on the upper playfield, looks like i'll have to remove upper playfield to access mechs. doesn't look like a fun job either. just had to change out a dead power supply which i had to cut and splice some connectors then this happens next day. ugghhh.
5 months later
best way to get the mini playfield off to reach underneath. both door gates quit working and this looks like a major pain in the ass just to access underneath upper playfield. ive probably done 40 shop jobs, but this looks like a whole other beast compared to bally/williams. 
thinking taking off backboard and monkey mech slide might look the easiest. anybody have to tackle this yet?
Quoted from pinballinreno:Follow the removal instructions in the manual.
Its near perfect.
unfortunately i only have the cd, with no way to play it.
Quoted from deejaypee:Great suggestions! I’m not going to try them though and here is why:
During this month of the woz being unplayable, as I pored over every single switch, solder, wire, and diode, I got a few error notices that I fixed while I was going over the game again and again. Nothing big, the castle playfield eos wasn’t registering, the plumb bob wasn’t registering, etc. After nearly a month of this and 8 hours on Saturday, I took Sunday off and reflected that at least I’d taken care of a couple of things during this time. Then I remembered that I’d also gotten a wifi communication error a couple of times but didn’t sweat it because, well, what did I care about Scorbit when I couldn’t even play the game?
THEN it dawned on me that the matrix switches were communicated from the I/O board to the motherboard by USB, and of course the wifi dongle is USB, and I figured what the heck, so last night I went down and unplugged the wifi dongle and turned the game on.
No more problems. Even the flickering lights were solid again. On the chance that it was a fluke, I let it be and tried it a few times today. Everything is perfect. It looks like all my constantly triggering switches and flickering lights were caused by some communication mixup brought on by my wifi dongle.
I have the one everyone here recommends—the TP-Link Nano AC600 USB Wifi Adapter. I’m glad it works for most of us, but if you ever start having crazy problems in your game, yank that sucker and see if everything goes away!
Apologies and thanks to everyone who helped this past month. The woz is back in business!
could you provide more details of where this is located?
2 weeks later
Quoted from julien_06480:This game was bought probably 9 or 8 years ago and only 20 plays ??!!... How can this be possible? Someone spent several thousands dollars just to put this in some corner of his house as a decoration?
been 3-4 code updates since new.
5 months later
2 months later
1 month later
kind of a crappy video of a product you want to sell, ditch the special effects and show us what you got.
Quoted from harryhoudini:More of a teaser, full video will be out soon. Personally, I think he looks pretty mean.
[quoted image]
looks killer
5 months later
Promoted items from Pinside Marketplace and Pinside Shops!
Greenville, NC
You're currently viewing posts by Pinsider ccbiggsoo7.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
