I've got a lot of lighting problems with my WoZ and was hoping someone here might have some leftover boards and cables from a 2.0 upgrade. I need to diagnose my issues and it would be a major. If you have something, PM me. Thanks!
You're currently viewing posts by Pinsider WhiskeyTango.
Click here to go back to viewing the entire thread.
I've got a lot of lighting problems with my WoZ and was hoping someone here might have some leftover boards and cables from a 2.0 upgrade. I need to diagnose my issues and it would be a major. If you have something, PM me. Thanks!
Quoted from PinMonk:The 1.xx boards are serial, so you can diagnose any lighting issue to specific boards with just one long jumper cable (or borrow one from late in the chain in a pinch) as long as you start from board 1 and move through them one at a time, jumping over and removing from the system menu boards that are not working right.
Considering everything from 28 is hosed, should I disable them all first and try one at a time?
Quoted from LTG:To test don't turn them off. I would try from #13 or #14 and work your way forward bypassing boards one at a time.
LTG : )
Ok. 13 & 14 are working properly at the moment, so this seems at odds.
Quoted from LTG:That is why you start with one of them. Take a long data harness and jump to the next board, and the next, and the next. One board at a time but keep using 13 or 14.
You do understand they are wired in series, a straight line ?
LTG : )
As an engineer by trade, indeed I do. I was getting hung up on a few process issues that didn't make sense, but I've got it taken care of I've identified three bad boards and am looking for replacements for W5, W1 & W3. If anyone has any they would be willing to part with, LMK. Thanks.
You're currently viewing posts by Pinsider WhiskeyTango.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/woz-fan-club-members-only?tu=WhiskeyTango and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.