Hi All,

Question, is there a way to increase the volume for the dialogue call-outs? The sounds are loud but whenever there is any of the characters talking it is barely noticeable. When you start a game and the witch laughs, you can barely hear it. I went into the sound settings but didn't appear to find anything that would fix it. I just updated the code and that didn't help either. I am wondering if there is a lose speaker wire or something but I have the worst luck troubleshooting things on my own and usually end up making issues worse so wanted to throw this out to the masses to see if there is anything I am missing. Thanks in advance.

in the service menu, in the "speech" setting, it looks like there are 3 categories, "running - repeat - manual". it says "press ENTER to change mode. Is "enter" the black button, if so, it doesn't do anything.

I checked all the connections, they are good. it has to be a volume adjustment but not seeing how to increase the sound for "speech".

good call, i only have the cd-rom and don't have a cd drive on my computer. will look on there site. just seems strange that i can toggle between the sounds on the setting board but can't adjust them.

thanks, just so you know, i am borderline pinball illiterate, are you referring to the green ground wire? The manual doesn't help, just tells you how to increase certain sounds, but i have done that and checked the connections.

can you be more specific? thanks for helping a brother out, just not sure what you mean by "ground loop". thanks again, always impressed with how much people help. really appreciate it.

okay, i think i am tracking with you. i looked in the manual, looks like it's J5, which is a 3.5mm audio output for the headphones. if i disconnect it and still play it while i order one, will it ruin anything?

Thanks so much for your help. So, I disconnected the 3.5mm cable from the port going into the metal box, and disconnected the ground isolator, went to plug it all back, then realized there are 3 3.5mm ports, green blue and pink and i didn't look before i plugged it back in so then there was no sound at all. lol. so i plugged everything back in, including the isolator, it worked. lol go figure.

I thought since the port in the metal box was pink, i thought it should plug into the 3.5mm pink port leading into the box but it worked when i plugged it into the blue port.

either way, it appears to be working an wouldn't have figured it out without your help so thank you so much. stay safe out there!

initially it didn't work but it could have been because i plugged the end that is outside of the metal box into the pink port so i reconnected everything back the way it was and for giggles fired it back up and it worked. i had taken the playfield up and down too many times and didn't feel like doing it again to disconnect the isolator. but if it happens again i know what to do. i just got this pin and have been playing it with the sound only half working, now that it works it's a whole new experience. much better.

will do man, thanks for the insight. will probably order a new one just in case cuz they're not expensive. thanks again my friend.