Last code update fixed this issue.

Thanks, guess I'll need to make sure I've done that lol.

been fixed with the 7 02 code

Thanks, writing the ISO now.

I finally broke a million!

91447ED8-9600-4C42-B905-C47744E316F5 (resized).jpeg

NICE. I'm working my way back up there, game has been out of service for a while. Quite rusty.

I’m trying to reach that 1,000,000 too.... our average at home it’s between 1/4 & 1/2 Million
4AE07A5A-CD85-4E33-A6D2-52EE6B3E42F1 (resized).jpeg258146DC-5008-4F9A-96E1-C0BEE6258B37 (resized).jpeg

Yup, just hit 513k myself after battling it all day. Getting close to lining up a bunch of stuff to really rack up some points but can't quite keep it going long enough.

Just bought my first pin ,family is all exited as much as I am.Not done with basement yet couldn’t wait ,set up near kitchen ...I’m green as grass w these machines. I got this sucker in from truck myself built a ramp but no way gonna get it down myself.Anyway I’m trying to decide if I want to tackle the few issues myself or get a tech out n try to learn before I start w it .I understand what to order for the bad switches but do I have to get the rainbow LED board to fix that (NB stay red)or is it fixable as is ..thanks for any input

8168AA96-E992-4BDD-80EC-D1E65799573E (resized).jpeg

97F5C35D-FAC2-46A8-967F-611ABE81D4C9 (resized).jpeg

AFB5A7D8-5D7C-48BA-B140-65168DC7D8BC (resized).jpeg

Oh and when I pull up the manual on screen it won’t show anything .Am I doing something wrong and is it worth it to pay $100 for the manual that’s as cheap as I’ve seen them .

The manual takes a couple minutes to load. Its a pdf document. This one below loads fine on my ipad. You don’t need the physical copy, its 468 pages.

http://marketing.jerseyjackpinball.com/woz/Wizard_of_Oz_Manual_3_5_Dec_2016.pdf

Thanks BigBad appreciate it .

Per your other post. They are Red as it shows on the switch test screen they are locked closed. You don't need to buy anything you simply need to adjust the switches slightly so they are Green on that test screen. I sent you a video on how to gap the switches correctly.

Awesome bird thanks a bunch.The thing that got me to finally buy my first was just reading the forums .This community is like no other I know.A collection of people with a similar interest constantly taking time to help others .Its how things should be !!

Dont buy the manual.

Print it yourself and have it spiral bound at kinkos or a print shop.

Fix things one at a time.

Go slow.

Thnx I know I’m like my kids age again all of a sudden and love it!!!

I haven’t had any hobbies last 12 years work 2 jobs . Don’t wanna be weird but pinball has giving me a feeling havnt had in a long time.Im excited about this for sure but I understand there’s slot to learn n the challenge is what is reviving me!!

It's a great hobby, for sure.

The real question is...have you picked out what your next pin will be yet?

Actually a guy I work with ,his brother has a Metallica prem he wants to get rid of.Im trying to work a work/$ deal with him .I’m hoping he needs some work done at house don’t have the full cash right now .Other than that yes I need a second .I made room for 4.Was thinking bout a original Ritchie BK.Guy where I used to live has it up on CL for 1900 what do you think ?

If you feel overwhelmed with woz, no way I’d go with Bk as the next game, much more difficult to diagnose and work on.

my GI board (number 2) under the munchkin playfield has cracked at the join so i am going to need a replacement. JJP has two versions of this board on their store and the part number for both doesn't match what the manual says. Anyone know which one i need to buy??

Cheers

I see they have the 5V and the 7.5V boards on there (no 2.0 boards interestingly enough) so you'll need to pull the existing one out and have a good look at it, it should be labeled. If you bought your game NIB less than 3-4 years ago you almost certainly have the 7.5V boards.

I did get 2/3 switches working that’s all I got time for today have to get back to work .Meanwhile at home I’m sure rest of family will put another 50 games in today ...Lmao I wanted to learn I gues this is trial by fire.thanks for the help everyone.

Iv just tried uploading a video on here but I am struggling. Any way my friend has a WOZ recently purchased from a previous owner. Every time he switches the machine on, a section of the playfield lights work fine for approximately 2 minuets then go off until the machine is turned off and on again. The same thing
happens every time. Any thoughts?

Bad connector. Start with the last working one, the one after it that goes out. Go over them. Page C-54 in the manual has the picture of how the data harnesses run to guide you.

I don't believe you can. Put it on Youtube or something and post the link here.

LTG : )

Fellas, where can I found the “Quote Sheet" of our game please?

Wishing everyone well...I’ve been on here just bought this machine first one .ive been through some easy fixes at least now not afraid to dive in .I will check on rainbow lighting issue tomorrow but 2 things I need advice on is the wizard works properly just doesn’t light up not even in tests .2nd the crystal ball I tried test with top glass off and not doing anything .Any advice when I tackle this tomro someine has said disconnect and re connect plug would this be for both ? Also should machine be turned of or leave on while doing this .any input I’d appreciate I’m trying to read up on this stuff just can’t find much time been real busy thanks .By the way that score was my 12th game it was super fun game!!!

C9712C86-9928-4E5D-B445-44F49687B4D6 (resized).jpeg

It’s likely to be more efficient for you if you try to resolve your issues in your other thread. Some questions you raise here were already answered in the other thread, including crystal ball. In addition, when someone else has similar issues, it will be much easier for them to follow the fixes in a dedicated thread. All connections should be done with game off as noted in the other thread. There is also an sd card in the crystal ball mount, remove and reinstall it.

https://pinside.com/pinball/forum/topic/just-bought-first-pin-and-all-hell-broke-loosetalk-me-off-the-edge-#post-5592740

I had the crystal ball issue, too. There is a dedicated fuse just for that. Fixed mine. Odd fuse, found it on eBay.

Thnx for your time I understand what your saying no BS this is my first time ever using any kind of social media never been on FB or anything .im feeling my way around after I send something if time passes I lose where I was at but I see now how to look up if questions were answered .I swear I’m not ignorant just computer illiterate .

You're doing fine. No need to apologize asking for help. And we won't judge you on punctuation for at least 20 more posts......lol You will get there.

Lmao ...thanks

Anyone know where in the menu you go to cancel the power to the tree bumpers? I believe you can do this by holding both flippers.

See attached pic...it is under Game Settings>Haunted Forest>Bumper Kill Availability
157FE651-E53E-449F-82D5-008B1B31237E (resized).png

Excellent. Thank you so much.

Does anyone know if the new run of Ruby Red machines have made it to distributors?

Why not order direct?

JJP shows them as out of stock. I could of swore there was talk of another run Being made? All I can find are YBR editions.

They did a run last fall when I bought my RR. I have not heard about another run of the RR’s since then.

I wouldn’t expect any more runs of them until after they complete their move to the new factory.

Anyone have a set of green ECLE side rails they might sell?

There was some damage to my game today, and the rails bent during a sudden shift and force on the cabinet. You can see in the pictures they don't line up with the back box. You can also see the bend.

I was thinking of trying to take them off and just bend them back, but someone suggested I try to get new ones because I won't be able to bend them back without leaving a lot of marks. Any thoughts? If new rails are called for please send me a message if you have any. I did leave messages for JJ today but figured I would ask here as well. Thanks.

IMG_1674 (resized).jpeg

IMG_1675 (resized).jpeg

60884581527__AABC05B3-1BA3-4646-9160-1282B1BB5AC3 (resized).jpeg

60884583013__3EB176A8-6236-47BA-8DC4-BB5C16FBE37D (resized).jpeg

60884587291__8B83CA21-6E8D-4751-ADAB-3329781E0E9A (resized).jpeg

IMG_1676 (resized).jpeg

IMG_1679 (resized).jpeg

carefully Pound it back into shape with a rubber mallet, while waiting for replacements?

I believe my local distributer ( FUN! Mesquite) has them

I missed it then. Damn it!

Thanks! I will check that out! I have a dist. Super close to me that has YBR editions only. I thought he would stock some of the RR run but never got any.

You might get lucky and find one somewhere. Good luck! I will never get rid of my WOZ RR!

I thought a distributor somewhere had a NIB ECLE. I just cannot remember who.

It’s pinballngames Milford CT. It’s a floor model but he wants 9989 for it. I wouldn’t pay that.

Hello all. Will you welcome me to your flock? I am a soon to be be a new member and am super excited!

I have The Hobbit and Dialed In. Love them both. Saw Woz at a pinball show two years ago and was shocked how beautiful it was. I was really impressed. It appears to be far deeper than either of those games, is that right? How can you possibly keep track of all the goals in this game!? I barely could keep track in tspp and this game makes tspp look like fish tales. Lol