(Topic ID: 87617)

WOZ Fan Club - members only


By TigerLaw

5 years ago



Topic Stats

  • 9,402 posts
  • 517 Pinsiders participating
  • Latest reply 5 hours ago by Daditude
  • Topic is favorited by 235 Pinsiders

You

Linked Games

Topic Gallery

There have been 1,253 images uploaded to this topic. (View topic image gallery).

00000IMG_00000_BURST20191117150926254_COVER (resized).jpg
email1574021565933 (resized).jpg
DSC00136 (resized).JPG
DSC00135 (resized).JPG
Capture1 (resized).jpg
Screen Shot 2019-11-15 at 12.47.55 PM (resized).png
DSC_2053 (resized).JPG
DSC_2052 (resized).JPG
DSC_1951 (resized).JPG
DSC_1949 (resized).JPG
55F89334-66EE-490D-BB56-E5C90A33CFF3 (resized).jpeg
image (resized).jpg
DDA8A1AF-F3F5-4302-995E-9B15024E3BE5 (resized).jpeg
D7365133-5712-4E63-AFAB-FFD2DB352547 (resized).jpeg
8D754EBC-78C1-4EB1-91E1-EB9E4A4E5360 (resized).jpeg
E1072C23-E140-4A5D-91E6-38D9623BFA65 (resized).jpeg

Topic index (key posts)

8 key posts have been marked in this topic (Show topic index)

There are 9402 posts in this topic. You are on page 183 of 189.
#9101 41 days ago
Quoted from pinballinreno:

To some extent yes.
Sorry, I found it humorous to seek perfection in a tiny plastic ball that goes unnoticed for the most part.
It made me chuckle...
And though way cool, doesnt do anything really.

Thats my OCD kicking in. I have a tenancy to notice tiny imperfections. My wife calls it my "binocular eyes" lol.

I love the crystal ball! I think its cool to see the images in there.

But my main point was that I wasnt sure if there was a plastic film on the screen that could be removed. I thought I saw tiny screws coming from the screen into the crystal ball, so wasnt sure if it could be cleared up.

#9102 40 days ago

My RR came with some spare black screws. Does anyone know what they are for?

I am unable to figure out what they might be used for.

974450E5-B0C1-4554-84FE-B608B1EC2E23 (resized).jpeg
#9103 40 days ago
Quoted from LukyDuck:

My RR came with some spare black screws. Does anyone know what they are for?
I am unable to figure out what they might be used for.[quoted image]

Are they for the topper?

#9104 40 days ago

Has anyone made munchkin house mods yet? I keep hearing they are coming, but I haven't seen them.

#9105 40 days ago
Quoted from DCFAN:

Are they for the topper?

Ah, that might be what they are for. Maybe extra screws for the topper. I could not think of anything that used black screws. I will check later on that. Thanks

#9106 40 days ago
Quoted from Daditude:

Has anyone made munchkin house mods yet? I keep hearing they are coming, but I haven't seen them.

Let's just say it's coming.. part of the render

There are a ton of extras with it, taking some time to fine tune each detail. Really happy with how it turned out.

pasted_image (resized).png
#9107 40 days ago
Quoted from harryhoudini:

Let's just say it's coming.. part of the render
There are a ton of extras with it, taking some time to fine tune each detail. Really happy with how it turned out.[quoted image]

That will make 3 people making Munchkin Huts.

#9108 40 days ago
Quoted from Ericpinballfan:

That will make 3 people making Munchkin Huts.

This is huts+

Lighting... flowers and vines... interactive ball lock... hummm

Also plug and play, 10 minute install, covers mechs that are exposed, hides wires, hand painted

pasted_image (resized).png

#9109 39 days ago

5 days old and my RR is already down. OZ Lang sling shot rubber snapped. No spare came with the game.

Where do you you recommend ordering spares from? Can you purchase a kit with all of the usual rubbers?

New to pinball so looking for options and recommendations.

Thanks

2C895AD7-1A39-4E7D-AA81-38DB159F88E6 (resized).jpegE4C8E654-9FE4-4E68-9BA4-2B37848028F4 (resized).jpeg
#9110 39 days ago
Quoted from LukyDuck:

5 days old and my RR is already down. OZ Lang sling shot rubber snapped. No spare came with the game.
Where do you you recommend ordering spares from? Can you purchase a kit with all of the usual rubbers?
New to pinball so looking for options and recommendations.
Thanks[quoted image][quoted image]

Marco specialties white rubber. The only choice. Literally all other white I've tried is crap compared to theirs.

No idea where in the world you are, but if you're in the US, there might be a pinsider that would cover you until your marco order comes in and you can give one back. If you were local to me I'd definitely get you the rubber that broke so you don't have to wait until your order comes in (especially with monday being a postal holiday).

#9111 39 days ago

I highly like the color matched titan sets. They really add to the look of the game with the appropriate colors in the various areas. Titan has a few different rubber kits already submitted by users but they may not be 100% correct, so count the rubbers and colors you want/need based on the manual as well.

https://www.titanpinball.com/kits/index.php/view/id/140

#9114 39 days ago
Quoted from LukyDuck:

OZ Lang sling shot rubber snapped.

Turn the slingshot power down. This video will help. Instructions on your ticket too.

LTG : )

#9115 39 days ago
Quoted from DCFAN:

First impression is chocolate cupcakes.

It's a render with a solid color, it will be a textured thatched roof painted to look like actual thatching.

#9116 39 days ago
Quoted from DCFAN:

First impression is chocolate cupcakes.

Here is a screenshot pic:

Screenshot_20191013-171847~2 (resized).png
#9117 39 days ago
Quoted from LukyDuck:

5 days old and my RR is already down. OZ Lang sling shot rubber snapped. No spare came with the game.
Where do you you recommend ordering spares from? Can you purchase a kit with all of the usual rubbers?
New to pinball so looking for options and recommendations.
Thanks[quoted image][quoted image]

The factory rubber is all black.

The ring under the munchkin PF is a 2" white rubber by design.

Get a black kit from marco plus add a couple 2" white rubbers.

Almost every game has broken that rubber very early.

The replacement you put on will last a lot longer.

Dont cut or nick the rubber in the corner upon installation. Stretch it thin while you stuff it on.

#9118 39 days ago
Quoted from Daditude:

Here is a screenshot pic:[quoted image]

Yeah, even with textures/painting added, the shapes and details on the huts are wrong. Looks more like a Sanrio toy.

#9120 39 days ago
Quoted from Daditude:

Here is a screenshot pic:[quoted image]

That's the wrong view.
You want the view from the game where dorothy first shows up in OZ. When you complete TNPLH.

Those huts near the water etc.

#9121 39 days ago
Quoted from vireland:

Yeah, even with textures/painting added, the shapes and details on the huts are wrong. Looks more like a Sanrio toy.

You really think we're going to get sales like Sanrio?! I don't think we can keep up.

#9122 39 days ago
Quoted from pinballinreno:

That's the wrong view.
You want the view from the game where dorothy first shows up in OZ. When you complete TNPLH.
Those huts near the water etc.

The water is just in front of the shot, you can't see it. It's the same area, the house is to the left over the bridge.

#9123 39 days ago
Quoted from harryhoudini:

You really think we're going to get sales like Sanrio?! I don't think we can keep up.

Don't get too crazy. You haven't even shown the product yet. No way to know what this looks like when printed.

#9124 39 days ago
Quoted from vireland:

Don't get too crazy. You haven't even shown the product yet. No way to know what this looks like when printed.

Well, there is one way...

pasted_image (resized).png
#9125 39 days ago

So one of my insert RGBs seem to have gone out. And 2 of my RAINBOW switches have stopped working as well which I believe is related to the light. Any tips on how best to fix? A new light board?

IMG_0287 (resized).jpeg
#9126 39 days ago
Quoted from adamross:

I believe is related to the light.

No.

Rainbow switches. Check in Tests - Switches - Matrixed. See if they work when pressed, or are stuck closed. Then dig deeper for broken wire stuff.

Insert is a small LED board. You can order a new one from jerseyjackpinball.com - Store - Parts - WOZ.

LTG : )

#9127 39 days ago

Thanks LTG. Can you advise which board I should order?

Screen Shot 2019-10-13 at 5.59.38 PM (resized).png
#9128 39 days ago
Quoted from adamross:

Can you advise which board I should order?

General Illumination one. 5 volts or 7.5 volts, depending what is in your game.

LTG : )

#9129 39 days ago
A1B3C77A-3D43-4097-95FB-25913EBB1E2A (resized).jpeg78DDB4E8-6BAE-4799-A6AE-2B59E8509FE4 (resized).jpegC766C0B9-9884-4D2F-8619-918228E04EF2 (resized).jpeg1FED3E58-3B10-405E-A266-B3AB69958EA5 (resized).jpeg
#9130 39 days ago

ltg Since you’re here can you help me with my 2.0 tin man ?
All the led plugged to J102 dont light. I checked them on another board they work and I tried reseating the cable but no luck.
Is there anything else I should try or is the board dead ?

12C2A44D-3CD8-47B0-9ECE-4B3A4A065315 (resized).jpeg
#9131 39 days ago
Quoted from adol75:

ltg Since you’re here can you help me with my 2.0 tin man ?
All the led plugged to J102 dont light. I checked them on another board they work and I tried reseating the cable but no luck.
Is there anything else I should try or is the board dead ?[quoted image]

Is the little green LED on the back side of the board lit where the power (not ethernet) connector plugs into that board?

#9132 39 days ago
Quoted from vireland:

Is the little green LED on the back side of the board lit where the power (not ethernet) connector plugs into that board?

Yes the led is lit. And the other ones plugged to the other port work well.

#9133 39 days ago
Quoted from adol75:

Yes the led is lit. And the other ones plugged to the other port work well.

If the green power LED is lit on the board, it's either a bad board or bad Ethernet cable. Do you have access to an ethernet cable tester? Or, failing that, some ethernet cables you can swap in to see if it's a cable issue?

#9134 38 days ago

Does anyone make a high quality custom shooter rod for WOZ? I noticed the color changing shooter rods are no longer available. Not interested in the character head shooters or the plain red ball. Also, has anyone come up with a quality decal/sticker or magnet for the blank square on the coin door? Looking to dress up the front of my RR a little.

#9135 38 days ago
Quoted from darkryder:

Does anyone make a high quality custom shooter rod for WOZ? I noticed the color changing shooter rods are no longer available. Not interested in the character head shooters or the plain red ball. Also, has anyone come up with a quality decal/sticker or magnet for the blank square on the coin door? Looking to dress up the front of my RR a little.

The blank square should definitely be swapped with the volume controls, IMHO. Really makes it convenient to make quick adjustments. Once I had it on my POTC I had to do WOZ.

http://www.pinnovators.com/catalog/product_info.php?products_id=57

Do you have an idea for a shooter rod? I think for the RR and ECLE (and probably YBR, I am guessing) the modfather rods are a nice fit, color wise. I was considering making a hot air balloon one or a crystal ball one but ... meh.

#9136 38 days ago
Quoted from darkryder:

Does anyone make a high quality custom shooter rod for WOZ? I noticed the color changing shooter rods are no longer available. Not interested in the character head shooters or the plain red ball. Also, has anyone come up with a quality decal/sticker or magnet for the blank square on the coin door? Looking to dress up the front of my RR a little.

Add the pinnovators volume control. I use it all the time.

#9137 38 days ago

so I keep on finding myself playing this game the same way:

witch SS
Then locks
mix in YBR shot to get dorothy even captured
Line up Munchkin mode when start MB
Try to get other MB going with castle

Is anyone else playing a diff way that I can mix it up a little but still make sense to progress well?

#9138 38 days ago

Thanks gents. I just went ahead and ordered the Modfather ruby red shooter rod and housing:

https://modfatherpinball.com/products/woz-ruby-red-shooter-housing-shooter-pincup?_pos=11&_sid=00bd4fdd7&_ss=r

I don't need a separate volume control, if anyone has a high quality decal or magnet for the blank coin door square, let me know. The start button is plain too, I'll search around to see if there's anything available to jazz that up. My hobbit right next to WOZ is all pimped out, but the WOZ is still pretty plain. Time to dress it up.

#9139 38 days ago

We have a start button we are working on that will have various designs and fit all JJP games (designs obviously for each game). Still working out the designs and fitment.

Why call attention to the blank spot in the door with added decoration? The panel hides it pretty well, IMHO.

#9140 38 days ago
Quoted from harryhoudini:

We have a start button we are working on that will have various designs and fit all JJP games (designs obviously for each game). Still working out the designs and fitment.
Why call attention to the blank spot in the door with added decoration? The panel hides it pretty well, IMHO.

Thanks and looking forward to seeing your JJP start buttons. The little details are what take these pins to the next level and the JJP pins are something special and deserve the upgrades. $220 witch upgrades are nice, but the front of the game is what I see most often and want it to pop. I’ll probably just leave the coin door alone unless I find a high quality WOZ decal or magnet to place in the blank square. BTW, if anyone has a flying monkey mod they want to sell, shoot me a PM.

#9141 38 days ago
Quoted from darkryder:

Thanks and looking forward to seeing your JJP start buttons. The little details are what take these pins to the next level and the JJP pins are something special and deserve the upgrades. $220 witch upgrades are nice, but the front of the game is what I see most often and want it to pop. I’ll probably just leave the coin door alone unless I find a high quality WOZ decal or magnet to place in the blank square. BTW, if anyone has a flying monkey mod they want to sell, shoot me a PM.

pinballgoddess felt the same as you, and she has the volume control. Uses it every day:

20191013_232803 (resized).jpg
#9142 38 days ago
Quoted from darkryder:

Thanks gents. I just went ahead and ordered the Modfather ruby red shooter rod and housing:
https://modfatherpinball.com/products/woz-ruby-red-shooter-housing-shooter-pincup?_pos=11&_sid=00bd4fdd7&_ss=r
I don't need a separate volume control, if anyone has a high quality decal or magnet for the blank coin door square, let me know. The start button is plain too, I'll search around to see if there's anything available to jazz that up. My hobbit right next to WOZ is all pimped out, but the WOZ is still pretty plain. Time to dress it up.

Careful when you bolt in the legs with that cup. I have the green one and it cracked the paint off pretty good. May want to add a washer or something.

Also, color changing shooter rod... https://cointaker.com/products/led-lit-shooter-rods

#9144 38 days ago
Quoted from Rager170:

Careful when you bolt in the legs with that cup. I have the green one and it cracked the paint off pretty good. May want to add a washer or something.
Also, color changing shooter rod... https://cointaker.com/products/led-lit-shooter-rods

Good to know, but I didn’t order the pincup as I don’t drink when playing or care for the look. That mini corn field mod looks interesting, though. Lots of mod potential with this game, one could get really crazy and add thousands in mods. Reminds me of Tron, self control is a must

#9145 38 days ago
Quoted from darkryder:

Good to know, but I didn’t order the pincup as I don’t drink when playing or care for the look. That mini corn field mod looks interesting, though. Lots of mod potential with this game, one could get really crazy and add thousands in mods. Reminds me of Tron, self control is a must

One airball and that corn is harvested with prejudice. Way too delicate to put under glass, IMO.

#9146 37 days ago
Quoted from vireland:

One airball and that corn is harvested with prejudice. Way too delicate to put under glass, IMO.

If you can get an airball to hit those and break them I'll send you a replacement set for free, for life.

But only to the original owner.

#9147 37 days ago
Quoted from harryhoudini:

If you can get an airball to hit those and break them I'll send you a replacement set for free, for life.
But only to the original owner.

What's this "only to the original owner" crap? Weren't you just on the other end of that?

#9148 37 days ago
Quoted from vireland:

What's this "only to the original owner" crap? Weren't you just on the other end of that?

I really, really need some sort of footer on my posts with a "/s" or "constant sarcasm implied" tagline.

Yeah, just a joke... really, I'm being serious in that I'd replace them if they broke for anyone. I spent a lot of time trying to figure out what would work the best, materials, options and what kind of damage they might incur and it seems highly unlikely that an airball ever makes it over there. But at the same time, I've thrown balls at them (outside the game) and mostly nothing happens. The worst that ever happened is one broke off at the base. I cleaned out the hole and glued it in, fixed. Mostly the ball just passes through the space between them because they are flexible enough and not that close together.

I'm mean, pretty much anything I make I'd help fix or replace if there was some issue done without malice.

#9149 37 days ago
Quoted from harryhoudini:

I'm mean, pretty much anything I make I'd help fix or replace if there was some issue done without malice.

Well, now you've taken all the fun out of it. This IS a game with a malevolent witch loose...

#9150 37 days ago
Quoted from darkryder:

Good to know, but I didn’t order the pincup as I don’t drink when playing or care for the look. That mini corn field mod looks interesting, though. Lots of mod potential with this game, one could get really crazy and add thousands in mods. Reminds me of Tron, self control is a must

Where is the corn field mod?

Promoted items from the Pinside Marketplace
$ 120.00
Playfield - Toys/Add-ons
ModFather Pinball Mods
$ 399.95
Lighting - Led
Pin Stadium Pinball LEDs
$ 2.50
Playfield - Protection
Pinball Mod Co.
$ 165.00
Playfield - Toys/Add-ons
Pixels Arcade Games
There are 9402 posts in this topic. You are on page 183 of 189.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside