6.5 update is on the JJP site now. Easy. Took all of 5 minutes.
New! Dark mode!
Browsing Pinside at night? Getting tired of all the white? Switch to dark mode using the button in the top right (or CTRL-B)!
Quoted from LTG:
Loosen the nuts circled in RED allowing you to move the switches closer to the plate. Reach around the lifted playfield and tap the strike plate while moving the swiches closer. When you have the sensitivity you want, just tighten the nuts back down.
LTG : )
It seems that my switches were already factory-set as close to the strike plate as they could be. Moving them in the OTHER direction makes the problem worse. Most of the time, the matrix still shows Left & Right as green, but sometimes a good hit will turn them dark blue again...until, of course, the next time I hit it. Those switches are craaazy sensitive.....sometimes, just lifting/lowering the playfield will cause them to be triggered.
Any other suggestions? :/
Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside