Wizard of Oz
Jersey Jack, 2013Vince recently made me these castle walls and cauldron. He is going to get different leds for the torches that flicker more still. What are your thoughts? I’ll try to get some videos up soon to show the lighting effects.
6F9E09CE-05D2-4DCA-8260-87CDFC85973A (resized).jpeg
4F549E6E-E884-4220-8D57-66DDAA28368B (resized).jpeg
AF15EBA8-55FF-45C1-8E45-9AA239DE71B3 (resized).jpeg
E03C840A-B13B-4167-BB20-DD101975ADC8 (resized).jpeg
I'm quite happy the way it turned out, by far the most difficult mod I have done. It is made very typical to my other mods; hand sculpted, then made to a mauld, cast with a plastic resin, and finally hand painted. For the most part the walls are 1/4" thick, but very a little.
I am thinking $400 CAN for the full mod. (Castle and Calderon) $120 CAN for just the colderon.
Quoted from Bantam:I guess it would be $280 cad or about $220 usd for just the walls. I wish I knew how to post videos. I have videos of the different combinations of color of the leds
Take video then post it to YouTube even if it is low resolution it will work . then copy and paste to pinside
Quoted from Bantam:I guess it would be $280 cad or about $220 usd for just the walls. I wish I knew how to post videos. I have videos of the different combinations of color of the leds
I will take a set at that price!
Looks interesting. Lots of detail. I like the look of the castle walls (although, a simple add-on to the already awesome BAC walls might be easier).
Cauldron... the size is as compared the size of the witch is not scaled right. Looks odd.
Quoted from FalconPunch:I'm not in the market for one, but if I was you I would get rid of the Skull. Doesn't really suit the theme.
Look closer. Not a skull. It's a monkey face with wings. Very fitting!
Quoted from 27dnast:Looks interesting. Lots of detail. I like the look of the castle walls (although, a simple add-on to the already awesome BAC walls might be easier).
Cauldron... the size is as compared the size of the witch is not scaled right. Looks odd.
I had a problem with the other walls. A ball hit it and it knocked them down. I wanted to have something stronger but still look great. As for the cauldron, it could be the way I took the pictures. Looks to be in scale in person. Thanks for your feed back. Can always tweak it to make it that much better
Quoted from Bantam:I had a problem with the other walls. A ball hit it and it knocked them down. I wanted to have something stronger but still look great. As for the cauldron, it could be the way I took the pictures. Looks to be in scale in person. Thanks for your feed back. Can always tweak it to make it that much better
What are the walls made out of? The ones I have are falling apart so I want some stronger ones. These are easily the best looking ones out there. Also would the red smoke mod work with the walls?
The input is great, I will be working on the wall this week to see if I can make the red smoke mod work with the castle. If you have any inquiries please PM me.
( The walls are made of plastic resin.)
Quoted from clg:What are the walls made out of? The ones I have are falling apart so I want some stronger ones. These are easily the best looking ones out there. Also would the red smoke mod work with the walls?
The walls are made from plastic resin then hand painted. They are super strong. I’ve been using them for a couple of weeks now.
Quoted from Djsandoz:Looks awesome I’d take a set!
Sounds good. If you can PM me with your email I will send you a PayPal request.
If you are PM ing for the mod, please specify;
- your email for a PP request.
- What colour of lights.
- If you have a Red Smoke mod.
- if you want the Cauldron.
The price for the full mod (castle and cauldron) is $400 CAN.
- Castle with no cauldron is $300
- Cauldron on its own is $120
Looks Sweet! My Only advise since 98 percent of the Pinside following is US is to use US Dollars as your advertised rate. Not sure what a Loonie is worth most days.... May be ordering soon. Thanks.
Quoted from rubberducks:I think they look great. However, the skulls around the cauldron look a bit more Metallica than WOZ. Just my opinion.
I’m sure that could easily be removed and maybe an hour glass be put there. Thanks for your input!
Quoted from spinny-vinny:If you are PM ing for the mod, please specify;
- your email for a PP request.
- What colour of lights.
- If you have a Red Smoke mod.
- if you want the Cauldron.
The price for the full mod (castle and cauldron) is $400 CAN.
- Castle with no cauldron is $300
- Cauldron on its own is $120
Does pricing include shipping costs?
Shipping is included for Canada and th US. Over seas I usually ask for some shipping. It usually costs me $40 Can. To send a mod to Australia for example vs. $16 to anywhere in America.
Quoted from spinny-vinny:There was some talk of me redoing the munchkin house all together. What are your thoughts?
I’m definitely interested. Would you make it 2 piece so the roof and house work together?
For price on roof... you say $60 C... what’s the cost shipped to US?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/woz-castle-walls-and-cauldron-by-spinny-vinny/page/1 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Calgary, AB
Sunrise, FL
Melbourne
