I have a 2014 build with the 7.5 boards. The lights for the slings and flippers are only displaying red and blue. Any ideas where to start?
You're currently viewing posts by Pinsider MooButt.
Click here to go back to viewing the entire thread.
I have a 2014 build with the 7.5 boards. The lights for the slings and flippers are only displaying red and blue. Any ideas where to start?
Looks like I’m having the same issue with 4 thru 7. Thank you for posting this. I’ll check the boards in the next couple days and post an update.
So I replaced 1-10 and 17-21, all fixed! Only issue I have now is it’s not kicking balls into the trough all the time now and sometimes feeding 2. The multiball arm is firing 11 times now when I turn it on or a game ends. I notice after I lock ball one, it doesn’t kick a ball into the trough. I imagine the 11 ball catch flicks are code for something?
Quoted from PinMonk:Ouch - 14 boards? That's almost halfway to a 2.0 system. If it was say 3 or 4 boards, I can see replacing, but 14? I would have just bit the bullet and got the 2.0 system so you're guaranteed your light problems are over. All you did by replacing all those boards from the old system is put off the inevitable and dumped a bunch of money in the toilet that you can't put towards the new system now.
It was an hour of time and $275 for a complete set of boards and wires. Whole lot more time and money in the 2.0 conversion. But you’re right, it’s only a band-aid. I can’t see myself ever parting with this tank, so it’ll have to be done at some point.
You're currently viewing posts by Pinsider MooButt.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/woz-75v-and-5v-led-boards?tu=MooButt and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.