Is there a different translite for WCS?
You're currently viewing posts by Pinsider pacman11.
Click here to go back to viewing the entire thread.
Alright I just got done shopping out my wcs and when I plugged all the ramps back in on start up I am getting a SLAM TILT is closed.. The slam tilt isn't closed because I've checked it.. Any ideas? Thanks!
Quoted from chuckwurt:Got pictures from before you took it apart? Make sure the connectors are back on right. Playfield slam tilt switches near by? Make sure they aren’t closed.
I only see three slam tilt switches, coin door, underside playfield, and plum bob. Three coorect?
Slam tilt closed issue solved, when shopping out the game and installing the ramps back on and plugging them in I switched up the two back connectors by accident. Switched them back and no slam tilt error game plays great now. But I do have a Mystery part I can’t seem to remember where it goes. Where does this part go?
B43D757E-F9D0-49B1-BCC0-4180B5A3766D (resized).jpegMy goalie just broke, anyone know where I can find a replacement one at? Marco is out of stock in them
Yeah that's a great fix to use metal. I've got an extra sticker of the goalie, I could probably take some sheet metal and make one..
Quoted from mastercello:Neat solution and very good looking in my opinion!
[quoted image]
Yeah I thought about trimming the outline of his head like that, but thought if the ball hit his head at a high speed it would destroy his head.
Switch #41 isn’t working on my machine. It’s an opt switch so I figure the transmitter was bad and changed it. Needless to say it doesn’t work still. I had continuity back to the opt board. Stuck on this one..
Quoted from provato:Check if the transmitter is working with your cell phone camera (front camera preferably if you have a high-tech cell - because usually front cameras don’t have infrared filters).
If the transmitter is working, change the receiver too
If you are sure both are working and you have continuity back to the opto board, the problem is either in the opto board or the WPC board or the connections to them. All of these are a bitch to troubleshoot... but check the optos first and then we’ll see
Probably a stupid connector issue. Transmitter isn't getting power. Need to check continuity between mpu and mini opt circuitboard.
Edit Fixed problem colder solder joint on opt board..
You're currently viewing posts by Pinsider pacman11.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/world-cup-soccer-94-owners-everyone-welcome?tu=pacman11 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.