Bermuda Triangle
Hope to join the club soon.
Fingers crossed
Love this game!
(Topic ID: 50131)
Linked Games
Addams Family, The
Bally, 1992-
Jurassic Park (Premium)
Stern, 2019
-
Oktoberfest
American Pinball, 2018
-
World Cup Soccer
Bally, 1994
Topic Gallery
You're currently viewing posts by Pinsider jorro.
Click here to go back to viewing the entire thread.
1 week later
Quoted from allsportdvd:Lightning I believe are 1/8 inch shorter
Thanks!
2 weeks later
Quoted from Kevlar51:I believe it's "01-12491 plate-back ramp connect"
Thank man!
Like mentioned in this topic before by someone, i put my setting for multiball to
Last easy release to 1
That way you can lock 2 balls and so start mb by hitting the ramps
It only does so the first mb after that you have to shoot final draw
1 week later
Quoted from lecter:Hi guys! What can be a reason of the alert like this, how to start repairing it?[quoted image]
the game does not have a upper flipper, i think that the game needs this switch to be activated thats how the board is build, so maybe the optos are dirty or failing
Or theres something wrong with the flipper board.
Try cleaning the optos first and check the interuptor.
Clean with qtip and cleaning alcohol (or homebrew moonshine or 90% vodka 
)
You can go into switch test and test if you use the flipperbutton two switches activate.
Cant get the long code for credit to work,
Any of you had this one working?
Yeah i know counting is not my strong point 
WCS LX2:
13R + 1L + 1R + 1L + 20R + 1L, Hello World
12R + 1L + 5R + 1L + 4R + 1L, Hello World
16R + 1L + 13R + 1L + 12R + 1L
1R + 1L + 2R + 1L + 3R + 1L
16R + 1L + 15R + 1L + 16R + 1L, Credits
19R + 1L + 1R + 1L + 3R + 1L, Special thanks
22R + 1L + 12R + 1L + 11R + 1L, Special thanks
3 weeks later
Got my pin2dmd led display in today
Bought it at https://techizy.fr/ real nice quality and service.
I have some color files but these are from someone whom didnt finish them i think.
Has anyone here got a finished file they could share?
20200723_203816 (resized).jpg20200723_203823 (resized).jpg20200723_203904 (resized).jpg20200723_203934 (resized).jpgQuoted from SkaterVet:I don’t have the file, but is that the CPR back glass? Do you like it? Where did you find the soccer ball speaker covers? They look great. Thanks.
No i got some nice not to bright leds behind my backglass.
The soccer speakers i made myself.
The color files are here on pinside where somewhere, i think Malenko made them, he does great work omn pin2dmd!
For the speakers i made a template, cut it out and attached to the speaker, then colored and removed the template.
1 week later
Quoted from Zeegske:Lx-1
[quoted image]
Hi
Try to follow the wires of the ball motor and find out where they go, if its not hacked.
3 weeks later
Quoted from Coz:Friend of mine has a prototype wcs94 thats all original, less than 350 plays in mint condition. What would this be valued at?
[quoted image][quoted image]
More detail pictures of it please!!
Quoted from Gogojohnnyquack:This is why you walk around at night with a UV flashlight in Arizona...
[quoted image]
20200902_070625 (resized).jpg 3 weeks later
Quoted from Grandnational007:Mine does that exactly. And has since day 1.
Mine 3!
1 week later
Quoted from Mattyk:I’m torn. I like how the red goes with the refs outline but yellow also looks great and matches the rest of the rubbers. I think I’m gonna stay with yellow for now
I went with orange, its the color of the dutch team.
Quoted from allsportdvd:How did you attach the Striker figures near the ramp entrances? Those figures originally had a base?
They are probably attached to the transparent washers.
In mine they have the ball at their feet and the ball is drilled with the bolt.
The figures are a pita to find them for a normal price 
3 weeks later
I have a striker and some wc94 Dutch team players as a topper
In the backglass i have an wc card with autograph from Ruud Gullit
A Fifa 94 knvb Dutchy the lion mascot and two strikers at the entry of the ramps
20201025_094819 (resized).jpg20201025_094827 (resized).jpg20201025_094836 (resized).jpg20201025_094843 (resized).jpg
Quoted from misterhare:What match did you see?
Germany Korea
Quoted from kdoggity:How did you install the characters by the ramps and TV? I love that, and would love to do something similar!
They are drilled trough the ball and then bolted on the stand up post.
You can also first attach to a transparent washer and place that on top of the post.
Quoted from thc666:joined the club on friday....have been looking for one for last 6 months.
totally agree she is fugly!!!!! worst part of the game.
Id do her
But hey...thats no standard 
1 week later
Quoted from Boosterfive:So the goal assist kick out threw up the metal ring that goes in the hole. I put it back in, and it works, but occassionally spits it out again. As I'm sure this isn't correct, and becasue the kick out does seem slightly under powered I looked to the manual to see if I could find a schematic. Doesn't seem to be in there.
Can anyone say why the metal ring is loose, and is getting kicked out? Does anyone have a schematic for this kick out so I can order parts? It looks like there are supposed to be 3 ridges that the metal piece connects to or sits on, and 1 of those rigs is broke off on my game.
Thanks for any help!
Thats an aftermarket hole protector.
I had them too in all 3 holes, they would sometimes pop out.
Took them out and never looked back.
Then after a wile
Upper hole kicked the ball out weird some times
Found them again and put some double sided tape around
And placed the upper one back in
Straight for the goul every time
The bottom ones are not neccesary on my game
Quoted from chuckwurt:What metal ring?
Think he means these protectors
20201104_204231 (resized).jpgQuoted from grantopia:Quick question as I just brought one of these home a week or so ago. If I hit the lock shot on the right ramp, the ball is moving so fast that it hits the switch to activate the magnet to lock the ball, but is moving too quick for the magnet to grab it. I've spent some time trying to adjust the switch but can't seem to find a happy medium. If I bend the switch out too far, shots on the left ramp will sometimes hang up on the switch. Any tricks on this or is it just playing with the swiych to get it right?
If you roll the ball manualy from just above the switch and magnet, does it stick properly?
Is the switch activated properly
In the menu check the magnet time
3 weeks later
Quoted from Bendit:I know, right? Mine's an amazing goalie.
Some people even claim that he's unbeatable!
Quoted from grantopia:Have some more info and hopefully trying to shake loose some ideas here.
I swapped the fliptronics board with one from one of my other games and the fuse doesn't blow so I think the problem is narrowed down to the fliptronics board.
I think based on the manual and WPC schematics that Q1 (TIP 36) and Q6 (TIP 102) are the main transistors associated with the magnet. I tested Q6 and it tested good. Q1 tested bad according to pinwiki (see picture) as one of the flanking legs had no reading. I thought I found the problem and ordered some more. They arrived yesterday and I tested them and they all read "bad" according to this testing procedure, with one flanking leg not giving a reading...am I testing this correctly? Is this procedure wrong?
I replaced both Q1 and Q6 and the fuse is still blowing after the first time the magnet engages.
Before I keep going back through the board is there anything obvious to check I'm overlooking? Can a magnet short to something under the playfield?
[quoted image]
Have you tested the fuseholder and fuses properly?
Mine had overpowered fuses in it from previous owner and some wonky fuseclips.
And be sure to check connectors and wires to the boards.
Quoted from nitrojcrawf:Where’s your goalie, did he receive a red card? Did you happen to look at the feature adjustments in the manual?
Edit. It’s not very clear in the manual either.
A.2 29 is special challenge but don’t know what that is.
A.2 34 not in manual.
Isnt the special challenge when you get most goals in multiball to date, special gets lit?
2 weeks later
Quoted from lecter:Hi Guys!
Recently some problems related to resets of the game occurred so I read a lot of threads on the forum and I will try to solve the problem. The most difficult issue is that there can be plenty of reasons of it and indicating the source of the problem is very difficult. So I'm going to check each component and I hope I can count on you when I have any problem.
Take care Guys, thanks for everything and enjoy your machines!
I wish you only happiness in the New Year! [quoted image][quoted image]
Be sure to first check the simple stuff like the grounding of the boards, and the state of the conectors and cold solder joints before moving on to replacing stuff
Sometimes the resets are easely fixed with those things
Quoted from lecter:When I was buying my WCS I was so excited that I didn't even noticed it. I prefer when things are fixed professionally instead of provisional
Would it be difficult to repair it in right way? I am not experienced in pinball but I would like to do it.
Yes fix it, if you have no repair and soldering skills (and materials), go see a pin repair guy.
Maybe search a local club or forum for people near you who can help.
1 week later
Quoted from Jerickso77:So my ramp diverter doesn't wan't to stay open. It opens all of the way and then kinda drifts half closed which can block shots. Anyone got any tips on how to fix this?
Have you checked the spring and arm thats on the coil
1 week later
3 weeks later
Quoted from arsmith7:My ramps are pretty beat up. How much of a pain am I signing up for if I replace the ramps? Is there any soldering involves or just a matter of taking off all the screws and throwing the new ones in?
Appreciate everyone's insight.
I believe Marco sells them with flaps and flashers rivetted
Also with the decal set.
You might need to solder the wires
Quoted from rlbohon3:Thanks. Tried that. No improvement.
Had that same problem
I put a playfield protector ring in mine and it kicks perfect ever since i placed it
2e0981a50a20268fc1b55f91dddc9df650b26e1e (resized).jpgQuoted from rlbohon3:Thanks, I’ll take a look at it again for that in particular.
Funny thing is, my problem seemed to START after adding a cliffy..
Thanks for the tips.
I dont mean cliffy, i mean the protector ring thats inside of the hole.
That made my ball eject with more oomph for some reason
Quoted from chuckwurt:Rubber. Should not be hard at all.
When using rubber, hard would be easier 
1 week later
Quoted from Mr_Tantrum:Touchdown?
From the photos I've seen, the '94 World Cup referee uniforms were not black and white stripes. Rather, they were black shorts with various color pattern white collar polo style shirts.[quoted image][quoted image][quoted image]
Be carefull what you say, it seems he has a gun pointed at his topper! 
1 month later
Quoted from arcyallen:I think I win some sort of award.
[quoted image]
Nice one! 
You can claim your award in the post a pic where your ball got stuck topic!!
https://pinside.com/pinball/forum/topic/post-a-photo-of-the-strange-place-your-ball-got-stuck
2 weeks later
Quoted from jk:The only thing that looks different is the color of the skin tone.
那是你弹球场上的漂亮小妞
(Nà shì nǐ dàn qiúchǎng shàng de piàoliang xiǎoniū)
2 months later
Quoted from djsolzs:Anyone have a translight for sale or know where one is available?
Maybe here
Dont know if available or how the quality is
Just spotted them on the interwebs two days ago
https://pinballdecalseu.com/shop/world-cup-soccer-pinball-translite/
1 month later
Quoted from Ceckitti:Anyone have any info on what this little fox represents? Or if there is a story behind him? LOL.
He is located on the back right corner of the right ramp behind the flasher cap.
[quoted image][quoted image]
I think its jpops cat
Its also on the speaker panel
2 months later
Quoted from rodclemen:Does anyone know what part that is?(the bracket holding the wire ramp) part no. or where to buy it.
My WCS doesn't have that so I "need" it
Thanks
/Rod
[quoted image]
Thats a picture of my old wcs you have there.
I made that bracket mysellf its not the original one
Couldnt find one so i made one mysellf
Promoted items from Pinside Marketplace and Pinside Shops!
Plantsville, CT
You're currently viewing posts by Pinsider jorro.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
