Wellington
Quoted from hisokajp:just rebuild the left ramp diverter but it still feel sluggish to return to the "non-activated coil" position (when it should be snugging left side of the ramp to divert to the right). Is there some trick to it? Use stronger spring to push the plunger back?
Anything else on the assembly that could be an issue? I do not think I have the C clip at the top but I doubt that is the issue here.
I have the same issue. I read that you need to check that the shaft is not binding to the ramps etc that it passes through. In my case there is no binding but the diverter does not always return. I am considering a stronger spring as well. Or maybe just a new spring, maybe the old one has lost some springiness.
Ft Lupton, CO
