Addams Family, The
Bally, 1992
Jurassic Park (Premium)
Stern, 2019
Oktoberfest
American Pinball, 2018
World Cup Soccer
Bally, 1994Quoted from Tablewicked:My goalie finally kicked the bucket, I had some Lexan laying around so I decided to make a replacement. I was worried the Lexan would be too stiff to trigger the switch but I was wrong, the switch registered every time! I have a NOS decal but I am going to leave it bare for now and have a few more games to see how it holds up
You have a wonderful opportunity to use a picture of your favorite keeper.....or even your least favorite politician
Quoted from Tablewicked:My goalie finally kicked the bucket, I had some Lexan laying around so I decided to make a replacement. I was worried the Lexan would be too stiff to trigger the switch but I was wrong, the switch registered every time! I have a NOS decal but I am going to leave it bare for now and have a few more games to see how it holds up
What thickness lexan did you use? Mine is cracked and wrapped in clear packing tape for now.
Quoted from SkaterVet:You have a wonderful opportunity to use a picture of your favorite keeper.....or even your least favorite politician
That would be a great idea! But what politician to chose? lol. I was thinking about putting my boxer on there as a joke, just need to find someone with Photoshop skills to help me out.
Quoted from mixmastapj:What thickness lexan did you use? Mine is cracked and wrapped in clear packing tape for now.
The Lexan I have is 1/8 thick, I am very happy with how it is holding up!
Quoted from Davi:The previous owner is almost right. There is only one clear post (type 03-8319-**), based on parts list.
I think here (clear star post is part of A-18775 striker brd assy):On top of that you need:
20 pcs 03-8365-25 post #8 trp-teal grn
5 pcs 03-8044-13 post mini-clear
2 pcs 03-8247-13 post #8 double star-clear
2 pcs 03-8247-25 post-#8 double star trp-teal
2 pcs 03-8130-13 post double star-clear
I have a clear post next to the shooter (next to the ball eject) Is this the same on every WCS94, or just mine?
Hi everyone. I have a problem with ball gearbox - I've recently changed a ball for a new one and then started to see that the ball is not spinning horizontally in 100%, it looks like it spins unstable and I'm afraid that the round ball base will scrach the playfield because of this.
I took the ball gearbox apart and found that the main element that is spinning is somehow loose - you can move it with your finger about 2 mm from a top centre.
Please can you help me with this? Maybe I'm overreacting - I do not know is it normal or do I miss some element in my gearbox. Anyone who's bought a new gearbox - have you noticed something like this?
A link to video showing the ball in action:
ready (resized).jpgready2 (resized).jpgready3 (resized).jpgNot sure about it moving but while you are in there fixing it, it looks like the ball is spinning the wrong way.
Pretty sure that’s right. It should throw the ball towards the goal when it comes out of a kickback.
I had mine running backwards for a long time, lol.
Thx. Does anyone know what it the black screw's that holds the ball (the one on the top of a ball) size/part number?
Quoted from kruger:The ball is spinning clockwise - if it's wrong I'll fix it.
That is correct then, I was watching on my phone it looked to be counter clockwise.
Just joined the club yesterday!
Tearing it down and getting her all cleaned up.
I want to LED this one pretty bad, (frosted/natural whites only) does anybody have a somewhat decent list of types and quantities of bulbs to grab from Comet? I've spent the better part of 6 hours reading through this thread, and it doesn't appear very comprehensive.
GGGGOOOOOOOAAAAAALLLLLLLLLL!!!!!!!
Quoted from Grandnational007:Just joined the club yesterday!
Tearing it down and getting her all cleaned up.
I want to LED this one pretty bad, (frosted/natural whites only) does anybody have a somewhat decent list of types and quantities of bulbs to grab from Comet? I've spent the better part of 6 hours reading through this thread, and it doesn't appear very comprehensive.
GGGGOOOOOOOAAAAAALLLLLLLLLL!!!!!!!
Just buy 555 and bayonet base types in bulk. 100 of each. Then you’ll have extra for other games. Get smd bulbs too. I like the 5050 ones.
Quoted from Grandnational007:Just joined the club yesterday!
Tearing it down and getting her all cleaned up.
I want to LED this one pretty bad, (frosted/natural whites only) does anybody have a somewhat decent list of types and quantities of bulbs to grab from Comet? I've spent the better part of 6 hours reading through this thread, and it doesn't appear very comprehensive.
GGGGOOOOOOOAAAAAALLLLLLLLLL!!!!!!!
Outstanding RonaldRayGun!!! Thank you!!!
One last dumb thing...
What color flipper rubbers does everyone prefer on these? I REALLY like PBL's perfect plays, so I was thinking purple, but may just go with the old standard red.
Quoted from Grandnational007:Outstanding RonaldRayGun!!! Thank you!!!
One last dumb thing...
What color flipper rubbers does everyone prefer on these? I REALLY like PBL's perfect plays, so I was thinking purple, but may just go with the old standard red.
Either color sounds great. Get both.
I also have purple on mine and it looks great. Really goes with the rest of the colors on the playfield, although I could see a teal color looking really good too.
Hi, I too joined the club a few months ago, and now I'm in the "shopping" process. 
I have a question for those of you who have an unshopped, untouched factory WCS (player's condition)
are these two machine screws shown in the picture with red arrows 4008-01168-10 (5/8 inch long) OR 4008-01168-08 (1/2 inch long)??
untitled (resized).JPG
Quoted from provato:Hi, I too joined the club a few months ago, and now I'm in the "shopping" process.
I have a question for those of you who have an unshopped, untouched factory WCS (player's condition)
are these two machine screws shown in the picture with red arrows 4008-01168-10 (5/8 inch long) OR 4008-01168-08 (1/2 inch long)??
[quoted image]
I'm guessing it's 1/2 inch... The screw doesn't have a lot to get through before it threads into the standoff. Mine currently has the wrong screw in it.
Quoted from JodyG:I'm guessing it's 1/2 inch... The screw doesn't have a lot to get through before it threads into the standoff. Mine currently has the wrong screw in it.
Mine had one 4008-01168-10 (5/8 inch long) in the right side (front ramp) and one missing in the left side (bottom ramp). I found another WCS but it was shopped a few years ago, this one had 5/8 inch long on one side and 1/2 inch long on the other side. Both screws seemed new though...
I have a couple connectors under the play field that are not connected to anything. Can anyone help identify these?
I noticed my right ramp flasher bulb has no wires soldered to it. (The flasher just above the coin toss mech) I'm guessing I need to purchase this part to get that flasher working again? https://www.marcospecialties.com/pinball-parts/H-18219-1
The other empty connector I'm not so sure about. I have noticed that the flasher lamp for the GOAL insert does not work. It is present and has a connector connected to it.
Also, still wondering if software version LA2 is the most up to date version for this game.
Thanks!
IMG_6730 (resized).jpgIMG_6731 (resized).jpgLooking further at the pics, it appears the rear, upper ramp harnesses aren't connected, along with the midfield, lower ramp harness. Does the right ramp entrance signage light up to indicate "buy ticket", etc? Are the 3 "overhead" back playfield gi lamps on?
Quoted from Grandnational007:Looking further at the pics, it appears the rear, upper ramp harnesses aren't connected, along with the midfield, lower ramp harness. Does the right ramp entrance signage light up to indicate "buy ticket", etc? Are the 3 "overhead" back playfield gi lamps on?
Thanks for checking. Yes, all the signs and GI lights are working. The only two things I’ve noticed not working are the two flashers I mentioned.
Never mind, I figured it out. It connects to a flasher.
I don’t suppose that could be the mystery that is causing my F116 fuse to pop?
I confirmed that my 2 mystery connectors were for the right ramp flasher and the Striker Awards hole light.
Can someone tell me what flasher test will make the GOAL insert flasher operate? The yellow hot dog shaped one in front of the goalie. Thanks!
Bought this game 22 yeas ago as my first game (I was 15 years old). Now into the market again for one! I miss it not having it in my collection.
So anyone in Belgium/France/NL/Germany looking to sell a nice / collectors condition example, pm me
Quoted from chuckwurt:[quoted image]
Those are really cool!
Well Done Adam!
Quoted from chuckwurt:Let me know if anyone wants to be put in contact with Adam who makes them.
Quoted from Coindork:I buy metal cards from Adam for all of my pins.
Yes please... can you post a website or other way to find out whats available and order these cards?
Quoted from Pinzap:Yes please... can you post a website or other way to find out whats available and order these cards?
Ill shoot you a PM with his email.
Quoted from Coindork:Ill shoot you a PM with his email.
Can you send me a PM too? Those metal cards look great.
Quoted from wcbu64:Can you send me a PM too? Those metal cards look great.
Yep, sure thing.
Quoted from Coindork:Ill shoot you a PM with his email.
Me too please, what kind of cost are we talking?
Quoted from allsportdvd:Me too please, what kind of cost are we talking?
$20-25 bucks a set I think.
Quoted from Coindork:Ill shoot you a PM with his email.
Me three!
Hey guys - glad you are enjoying the cards! Card sets are $35 shipped in the US. Discounts available for multiple sets purchases. I appreciate the above support!
I only sell the printing service of the cards on metal. I do not own the images and usually request the buyer provides the image for printing. I do have many examples for you to choose from however. I have made my own images for some friends and repeat customers for popular machines, I have had buyers make their own images and customize for shows etc.
Feel free to pm me here with machines you are interested in. If you would like examples just shoot me your email Ill send pictures. I do not have a dedicated business I just do this on the side to support the hobby. I started by making them for some friends and they liked them so much Ive offered them by word of mouth. Usually takes 7 days to turn around shipping. Each card is hand pressed and hand cut.
-Adam
i could see this being a cool option for my "keepers". sorry if this was mentioned, are they silk-screened or just print-out with adhesive?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/world-cup-soccer-94-owners-everyone-welcome/page/86?hl=wcbu64 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Marvin, NC
Halifax, NS
Singapore
Τρίκαλα
Lauwe
Brisbane