World Cup Soccer 94 owners. Everyone welcome.

(Topic ID: 50131)

World Cup Soccer 94 owners. Everyone welcome.


By DEWSHO

5 years ago



Topic Stats

  • 4,508 posts
  • 438 Pinsiders participating
  • Latest reply 5 days ago by TheCapn
  • Topic is favorited by 142 Pinsiders

You

Linked Games

Topic Gallery

There have been 1,001 images uploaded to this topic. (View topic image gallery).

large (resized).jpg
rhtPRgL (resized).jpg
LMyGuxw (resized).jpg
0mbwn1l (resized).jpg
GbFMQHA (resized).jpg
90794555-EE39-4DEA-B1C9-D83C1D091ABE (resized).jpeg
20180926_102914_1537972170632 (resized).jpeg
20180926_102906_1537972170991 (resized).jpeg
20180920_121657 (resized).jpg
20180920_121737 (resized).jpg
20180918_212420 (resized).jpg
IMG_2998 (resized).JPG
20180915_163434 (resized).jpg
20180915_164733 (resized).jpg
02009500_2900271 (resized).jpg
coin (resized).png

There are 4512 posts in this topic. You are on page 84 of 91.
#4151 4 months ago

Which ramp is needed to be remade the most right now? Bottom left side? I may be able to start working on this since Starship never got in gear.

#4152 4 months ago

I need some help with identifying the parts in the picture. These pieces were missing when I finally grabbed a WCS94. The blue arrows represent the black spacers. What length and diameter are these? The red arrows point to the plastic washers. What diameter are these? The yellow arrows are pointing to the screws that hold everything down. What type of screws are these and what length? I've also noticed this same setup on the other ramp entrance. I understand that this plastic washer setup is protecting the ramp entrance. Was this stock or something that came later? Thank you in advance for the info. This has been driving me batsh*t.

pinside2 (resized).jpg
#4153 4 months ago

Mine only had 1 of those large washers. When I bought a new plastic set, it came with four. The only one I had was located on the left of the ramp you have pictured.

#4154 4 months ago
Quoted from JodyG:

Which ramp is needed to be remade the most right now? Bottom left side? I may be able to start working on this since Starship never got in gear.

I just replaced the right/upper ramp from the Australian parts site. The quality was just ok...the edges between the two ramps are a little janky. No one makes the left side ramp currently.

#4155 4 months ago

I really wish Freeplay40 would make the WCS94 ramps - I trust his work!

#4156 4 months ago

Thank god my ramps are in great shape. I would probably still buy a set for spares though.

#4157 4 months ago
Quoted from wombat:

I need some help with identifying the parts in the picture. These pieces were missing when I finally grabbed a WCS94. The blue arrows represent the black spacers. What length and diameter are these? The red arrows point to the plastic washers. What diameter are these? The yellow arrows are pointing to the screws that hold everything down. What type of screws are these and what length? I've also noticed this same setup on the other ramp entrance. I understand that this plastic washer setup is protecting the ramp entrance. Was this stock or something that came later? Thank you in advance for the info. This has been driving me batsh*t.

I remember someone here in the forum making a bunch of them at one point, and I recall him offering them for sale. Simple part... Just a circle with a hole in the middle. Can't recall for sure, but I think it was BioBa

#4158 4 months ago

I’ll probably have to fabricate this plastic piece... :/

D44F568B-9477-4C5D-B1D5-4AC902D44A2E (resized).jpegEE2E0802-5385-44CC-9051-BFF43A2C6940 (resized).jpeg

Coin toss violence. Probably due to the higher-power shooter spring. But hey, at least people could make the shots! Ah, tradeoffs...

#4160 4 months ago

Does anyone have a lead on where I can purchase this decal only?
It's the once under the top ramp above the bumpers

wcs94 (resized).JPG
#4162 4 months ago

Thanks!
Didn't think Marco's had that one.
Planetary Pinball wanted $56 minimum shipping for the decal, Marco's $3.99 shipping
Just a small difference there

#4163 4 months ago
Quoted from allsportdvd:

Thanks!
Didn't think Marco's had that one.
Planetary Pinball wanted $56 minimum shipping for the decal, Marco's $3.99 shipping
Just a small difference there

No different in Canada, $50 shipping for $5 in parts.

#4164 4 months ago
Quoted from allsportdvd:

Does anyone have a lead on where I can purchase this decal only?
It's the once under the top ramp above the bumpers

Talking about this plastic.... what is the right orientation... I have seen it "pointing" to the center of the bumpers and seen it l"pointing" under the ramp, it seems that having it under the ramp avoid some airballs to get caught under the ramp. Not sure though.

Best,

~ja

#4165 4 months ago

Cleaning up my WCS and noticed this hack in the switch wiring harness. Can someone provide a few pics of what this looked like from the factory?

Anyone know why the 5 pin connector is spliced into the BLK and GRY/YEL wires? What does this connect to?

Also, the WHT/PUR wire just ends. Should this connect to something?

Note: The game was functioning perfectly. Unfortunately, my personality doesn't allow these wires to remain as is.

Thanks for any help.
20180609_112917 (resized).jpg20180609_112925 (resized).jpg20180609_112937 (resized).jpg

#4166 4 months ago

Nice to know our pinball is relevant every two years!! 4 days until the show begins....

C3CA1B1F-C5F6-45CE-9906-C202514D5EBE (resized).jpeg
#4167 4 months ago
Quoted from Blitzburgh99:

Nice to know our pinball is relevant every two years!! 4 days until the show begins....

Dogs play soccer every two years?

#4168 4 months ago
Quoted from Frippertron:

Dogs play soccer every two years?

Yes....yes they do!!! Just wrapped up another trophy...

AB32BABD-A021-46BE-B990-9011660311A6 (resized).jpeg
#4169 4 months ago
Quoted from Frippertron:

Dogs play soccer every two years?

Sometimes it’s their cousin, the wolf!

AC114737-471A-4419-B3F2-0D25EC7692BA (resized).jpeg
#4170 4 months ago

New alt translite for this year event...

844E1F84-F6B2-455F-BC7A-282D4B3D4A52 (resized).jpeg
#4171 4 months ago
Quoted from Blitzburgh99:

New alt translite for this year event...

Love it!! May have to steal your idea!

#4172 4 months ago
Quoted from xfassa:

Cleaning up my WCS and noticed this hack in the switch wiring harness. Can someone provide a few pics of what this looked like from the factory?
Anyone know why the 5 pin connector is spliced into the BLK and GRY/YEL wires? What does this connect to?
Also, the WHT/PUR wire just ends. Should this connect to something?
Note: The game was functioning perfectly. Unfortunately, my personality doesn't allow these wires to remain as is.
Thanks for any help.

White-Violet from the trough opto controller is supposed to be connected to the CPU board on connector J209 on the end pin. The manuals say "Row 7", but this does not exactly make sense, as nothing from the trough is in row 7... Just rows 1-6, in column 3, and also row 1 in column 4 only. It may not actually be used. So long as you go into your switch tests, and verify the operation of each opto sensor in the ball trough, you should be good to go.

So strange that someone completely cut the batch of wires, as if they were replacing a burnt connector from another machine, and just cut and patched instead of re-pinning. It's a crazy world full of hackers!

The yellow-gray and black wires are 12V power for the opto board. Looks like someone tapped into that for some sort of add on. Not hurting anything I guess... But I would not use it for power, because there is no way of knowing how a power drop would impact the opto controller. Just too risky. There are better sources of power. Clearly this connector was added by someone for some reason, but again, I would not use it.

At least who ever was mulpeckering this solution had the sense to solder and shrink wrap all of the connections. Perhaps it was a game owned by some gaming service that placed the machine at bars and such, and this was some sort of repair to keep it running. Who knows...

All good questions! Hopefully, some of these answers are helpful.
-Dana

#4173 4 months ago
Quoted from Blitzburgh99:

Nice to know our pinball is relevant every two years!! 4 days until the show begins....

OK... What's with the trophy? Did you make it? Or is that something that is sold? I am assuming you are probably not one of the players who won the championship, are you???

#4174 4 months ago
Quoted from dleasman:

OK... What's with the trophy? Did you make it? Or is that something that is sold? I am assuming you are probably not one of the players who won the championship, are you???

It’s a replica. The guy I got the game from was going to mount it on top of the game and put lights shining on it as a topper. I’ve just had it sitting on a shelf in the gameroom.

#4175 4 months ago
Quoted from Blitzburgh99:

Nice to know our pinball is relevant every two years!!

4 years mate. The last WC was in Brazil 2014, then previous in South Africa 2010, Germany 2006, etc.

#4176 4 months ago
Quoted from Bugsy:

4 years mate. The last WC was in Brazil 2014, then previous in South Africa 2010, Germany 2006, etc.

I count the women’s World Cup, too

8843B1D9-3476-4501-9BEE-BA7842E3F98A.gif
#4177 4 months ago

4E37DA2E-2B0E-41BB-8E5E-53BBC6BB93ED-39482-000011BBBCA183A3.gif
#4178 4 months ago

In 2026 it's back in US again.

U.S., Canada, Mexico Unite Long Enough to Win 2026 World Cup Bid https://www.bloomberg.com/news/articles/2018-06-13/u-s-canada-mexico-unite-long-enough-to-win-2026-world-cup-bid

#4179 4 months ago

Deleted comment

#4180 4 months ago
Quoted from RonaldRayGun:

In 2026 it's back in US again.
U.S., Canada, Mexico Unite Long Enough to Win 2026 World Cup Bid https://www.bloomberg.com/news/articles/2018-06-13/u-s-canada-mexico-unite-long-enough-to-win-2026-world-cup-bid

So time to design a new world cup machine

#4181 4 months ago
Quoted from sirlonzelot:

More
So time to design a new world cup machine

How can anyone improve upon perfection? Maybe just retheme existing layout? Vault edition? Lol

#4182 4 months ago

lol; vault!

#4183 4 months ago

I have an issue with the corner kick back. When I use the first kick back, it works ok. However, after hitting and lighting the corner kick roll over outlane, the kick back doesn’t fire when the ball drains. Any ideas about why? It is weird. I have set the number of kickbacks to three in settings.

Is the kickback supposed to work once per ball?

#4184 4 months ago
Quoted from KeeperUSA:

I have an issue with the corner kick back. When I use the first kick back, it works ok. However, after hitting and lighting the corner kick roll over outlane, the kick back doesn’t fire when the ball drains. Any ideas about why? It is weird. I have set the number of kickbacks to three in settings.
Is the kickback supposed to work once per ball?

Does the switch register in test?

#4185 4 months ago

Yes, the kickback switch registers in test. It just doesn’t fire the kicker after the corner kick light is actived in the right flipper outlane.

#4186 4 months ago

There are several kickback settings, but if any of the arrows are lit you should get a kickback. That switch can be flaky and intermittent tho, I recently changed mine and it fixed all my kickback issues.

#4187 4 months ago

Thanks for the help. I just realized that you have to hit the red target to reactivate the corner kicker. Doh!

#4188 4 months ago
Quoted from KeeperUSA:

Thanks for the help. I just realized that you have to hit the red target to reactivate the corner kicker. Doh!

Not if it goes down there from the top outlane switch. The one under the lock. That’s the one I thought we were talking about.

#4189 4 months ago
Quoted from chuckwurt:

Not if it goes down there from the top outlane switch. The one under the lock. That’s the one I thought we were talking about.

I believe this is a setting in adjustments, off-hand..

#4190 4 months ago

First game 2018 World Cup starts in about 2 hours! Russia vs. Saudi Arabia. Who’s gonna join me in a game or two of WCS94 around that time????!!!!??
F180C003-7221-46A2-86D6-EB81A0228B59 (resized).jpeg

#4191 4 months ago

Hup, Holland, Hup!

Oh, wait ...

#4192 4 months ago

Go USA!!

Oh wait...

#4193 4 months ago

Iceland anyone?

... your opponent...Iceland!

#4194 4 months ago

Do any of you guys stream via Twitch? I would love to -battle- on WCS while the World Cup.

~ja

#4195 4 months ago
Quoted from uncle_jose:

Do any of you guys stream via Twitch? I would love to -battle- on WCS while the World Cup.
~ja

I do! Bring it on!

#4196 4 months ago
Quoted from chuckwurt:

I do! Bring it on!

Sweet! PM sent!

~ja

#4197 3 months ago
Quoted from rollitover:

Iceland anyone?
... your opponent...Iceland!

They have a good team this year....tied Argentina in first game. They have a great chance to advance out of group play

#4198 3 months ago
Quoted from Blitzburgh99:

They have a good team this year....tied Argentina in first game. They have a great chance to advance out of group play

Noted.
I was merely pointing out
the obscurity of Iceland being in the tournament.

#4199 3 months ago

And yes I also agree with you in that they do have a good team.
Hopefully the newcomers can make some serious noise!

#4200 3 months ago
Quoted from rollitover:

Noted.
I was merely pointing out
the obscurity of Iceland being in the tournament.

Definitely not a team one expected to qualify and then to tie Argentina...Messi has to feel like he’s snake bit at World Cup.

Promoted items from the Pinside Marketplace
$ 66.95
Cabinet - Shooter Rods
Super Skill Shot Shop
Wanted
Machine - Wanted
Racine, WI
$ 129.00
Lighting - Led
LED OCD
$ 17.50
Playfield - Plastics
Bright Lights Pinball
$ 229.99
There are 4512 posts in this topic. You are on page 84 of 91.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside