World Cup Soccer 94 owners. Everyone welcome.

Thank you everyone for your help these past few weeks. I was able to source my missing free kick plastic from www.Pinball.Centre.

I was also able to take the rivets out of the Stryker plastic, which allowed me to replace the header kick plastic!

Now I just need a new left ramp plastic. I’ve made a makeshift purple plastic to hide the cracks for now. Still trying to find this plastic!

Last bit, I added an extra net decal to the goalie net which I think looks good. Did t like seeing the bare metal there.

92F76914-98D8-4F6E-9533-E7A0E7653F2C (resized).jpeg

9F92AD84-1028-4D1E-B4F6-4659F5540BF7 (resized).jpeg

A08D3755-5B31-4DB5-92E8-B2E3A5DD8080 (resized).jpeg

C5DF021D-25F8-49EA-899C-748F5F3BB979 (resized).jpeg

#7652 1 year ago

BRU

JediPimp

Pinside member

https://www.marcospecialties.com/pinball-parts/20-9663-D-1

Oh also does ANYONE know where I can find an extra ball button? The plastic on mine is cracked. They seem to be very hard to find now!

CBBBFBE6-F49F-41ED-8189-B41C4076A946 (resized).jpeg

#7653 1 year ago

PAT

RonaldRayGun

Pinside member

Singapore

8y 35,800 221 2

Quoted from JediPimp:
Oh also does ANYONE know where I can find an extra ball button? The plastic on mine is cracked. They seem to be very hard to find now!
[quoted image]

#7654 1 year ago

BRU

JediPimp

Pinside member

Quoted from RonaldRayGun:
https://www.marcospecialties.com/pinball-parts/20-9663-D-1

Oh wow thanks. I like that they have an international checkout option that displays the total in your currency.

#7655 1 year ago

JON

AlexRogan84

Pinside member

3y 57,800 1,141

Ministry shows that plastic piece in stock: https://www.ministryofpinball.com/en/world-cup-soccer-94-plastic-31-1925-21-sp.html

#7656 1 year ago

BRU

JediPimp

Pinside member

Quoted from AlexRogan84:
Ministry shows that plastic piece in stock: https://www.ministryofpinball.com/en/world-cup-soccer-94-plastic-31-1925-21-sp.html

Thanks!

#7657 1 year ago

MMM

nerdygrrl

Pinside member

https://mantispinball.com/product/world-cup-soccer-protector-set/

Has anybody installed the Mantis hole protectors on their machine and if so what are your thoughts on them?

#7658 1 year ago

DJR

Gorgar666

Pinside+ Frequent

Quoted from scootss:
What's wrong with this picture...?
I am still struggling with my goalie getting stuck under the crossbar of the goal. Usually it is the top of the metal bracket that the screws go into that gets caught. Occasionally it is the screws themselves.
Basically, the goalie moves fine left and right and if it gets hit by a ball while it is in the center, it gets wedged under the crossbar.
I've replaced the bracket that goes on the motor and the two long pieces that have cams on them. I've filed down the trough so it is nice and flat.
Does anything look amiss in these pictures? Would someone mind removing their goalie and sending a few pics?
thanks!
[quoted image][quoted image][quoted image][quoted image]

How many e-clips are on this mech? Is there one on the motor cam that slide up and down?

#7659 1 year ago

JON

AlexRogan84

Pinside member

3y 57,800 1,141

Quoted from Gorgar666:
How many e-clips are on this mech? Is there one on the motor cam that slide up and down?

How far back was this goal photo you’ve referenced? I don’t see it.

Got thinking of another reason why there could be interference with the top of the goal and the top of the goalie’s head, and that would be if the back of the goal assembly and bracket isn’t secured down all the way. If the back was sticking up a little too far it would point the front down a little too far and cause interference. Possibly. Just a thought.

#7660 1 year ago

DJR

Gorgar666

Pinside+ Frequent

Is there supposed to be a e clip here?

53E7F118-C730-4837-AB15-BE728640F6A3 (resized).jpeg

B82F45B5-56C8-44CB-91CF-990A78E78870 (resized).jpeg

#7661 1 year ago

FMD

Days

Pinside member

2y 57,550 484 29

Hello, does anyone have a solution or a mod to make the motor of the ball less noisy, like a silent ball drive? thanks

#7662 1 year ago

SSS

scootss

Pinside+ Frequent

Long Island, NY

4y 73,300 1,246 6 8

Quoted from Gorgar666:
Is there supposed to be a e clip here?

OP here...I tried a ton of things to get this to work...

- Replaced the three main parts of the mechanism
- Best as I could tell (looked at manual, pics, asked people)...there is not a second e-clip. I did add one...and it didn't fix my problem
- I'm quite sure the goal was fully screwed down because the issue started happening...I tweaked a bunch...then I did a full topside teardown...and upon reassembly, still had the issue.

The final fix...
- I bent the goalie bracket out toward the flippers just a touch AND I added a second rectangular metal bracket that attaches the goalie to the leaf switch. Haven't had the issue in the months since...

#7663 1 year ago

SSS

scootss

Pinside+ Frequent

Long Island, NY

4y 73,300 1,246 6 8

Quoted from Days:
Hello, does anyone have a solution or a mod to make the motor of the ball less noisy, like a silent ball drive? thanks

No..it's just a loud mech.

But..you can take apart the gear case, clean it out and re-lube with a bit of lithium grease. That may help a bit. Still loud tho!

#7664 1 year ago

FMD

Days

Pinside member

2y 57,550 484 29

Quoted from scootss:
No..it's just a loud mech.
But..you can take apart the gear case, clean it out and re-lube with a bit of lithium grease. That may help a bit. Still loud tho!

thanks, am ok with the sound, just i saw someone selling one and on the announce he said his motor is with a silent motor, that's why i asked

#7665 1 year ago

DJR

Gorgar666

Pinside+ Frequent

Looking for the unbreakable goalie plastic. Not the sticker regular. Where did I see this for sale…..Kind a looks like a regular screen printed plastic. .

#7666 1 year ago

911

firefighter

Pinside+ Addict

Titonka, IA

9y 77,800 157 10 15

Quoted from Gorgar666:
Looking for the unbreakable goalie plastic. Not the sticker regular. Where did I see this for sale…..Kind a looks like a regular screen printed plastic. .

I got mine from Pin Haus. Go to the market side of WCS and you can find it there

#7667 1 year ago

DJR

Gorgar666

Pinside+ Frequent

Quoted from firefighter:
I got mine from Pin Haus. Go to the market side of WCS and you can find it there

How’s it holding up? How long did it take for you to receive it? This is out of country right?

#7668 1 year ago

911

firefighter

Pinside+ Addict

Titonka, IA

9y 77,800 157 10 15

Quoted from Gorgar666:
How’s it holding up? How long did it take for you to receive it? This is out of country right?

Its doing fine and installed it last month. Yes it out of the country but shipping was fine . I think it took about 2 weeks.

#7669 1 year ago

DJR

Gorgar666

Pinside+ Frequent

Quoted from firefighter:
Its doing fine and installed it last month. Yes it out of the country but shipping was fine . I think it took about 2 weeks.

nice

#7670 1 year ago

MMM

nerdygrrl

Pinside member

Random question, what have y'all used to clean the gold pieces on this machine? I wasn't sure if Flitz and regular metal polish were the right way to go or not.

#7671 1 year ago

A V

TonyVrd

Pinside+ Frequent

Quoted from nerdygrrl:
Random question, what have y'all used to clean the gold pieces on this machine? I wasn't sure if Flitz and regular metal polish were the right way to go or not.

I use Blue Magic Metal Polish Cream. Glad I bought and tried this before exchanging/buying a skill shot ramp from pinball plating. The part on my machine looked dull and rusted and after using the polish it looked practically brand new and had a high shine to it.

#7672 1 year ago

SSS

scootss

Pinside+ Frequent

Long Island, NY

4y 73,300 1,246 6 8

Quoted from TonyVrd:
I use Blue Magic Metal Polish Cream.

Did that work well on the legs, too?

#7673 1 year ago

MMM

nerdygrrl

Pinside member

Quoted from TonyVrd:
I use Blue Magic Metal Polish Cream. Glad I bought and tried this before exchanging/buying a skill shot ramp from pinball plating. The part on my machine looked dull and rusted and after using the polish it looked practically brand new and had a high shine to it.

Thank you!

Quoted from scootss:
Did that work well on the legs, too?

It should, it's the same finish.

#7674 1 year ago

MMM

nerdygrrl

Pinside member

If any of you wouldn't mind snapping a pic of your J120, 121, and 123/124 connectors on your driver board I would greatly appreciate it. The wiring on the game I am working on has been hacked, spliced, replaced and is a mess and I want to make sure everything is as it should be. Then again I guess I could check the schematics, but I am pretty terrible with those.

I checked my schematics and the colors and positions noted do not line up with what is in this machine.

#7675 1 year ago

DJR

Gorgar666

Pinside+ Frequent

Quoted from nerdygrrl:
If any of you wouldn't mind snapping a pic of your J120 and 121 connectors on your driver board I would greatly appreciate it. The wiring on the game I am working on has been hacked, spliced, replaced and is a mess and I want to make sure everything is as it should be. Then again I guess I could check the schematics, but I am pretty terrible with those.

The Manual will tell you perfectly. Im away from mines now or I would.

#7676 1 year ago

DJR

Gorgar666

Pinside+ Frequent

Believe all those are G.I.

#7677 1 year ago

MMM

nerdygrrl

Pinside member

Quoted from Gorgar666:
Believe all those are G.I.

They are in fact GI. I do better with visuals, but will look up the manual in a bit. I am working with some "special" repairs here.

#7678 1 year ago

BRU

JediPimp

Pinside member

My game is coming along nicely. I heard that there are speaker insert stencils you can find online and print? Anyone know where they are? You just spray paint the grills white over them right (after removing the grills)?

#7679 1 year ago

A V

TonyVrd

Pinside+ Frequent

https://www.aussiearcade.com/topic/70236-world-cup-soccer-94-speaker-stencil/

Quoted from JediPimp:
My game is coming along nicely. I heard that there are speaker insert stencils you can find online and print? Anyone know where they are? You just spray paint the grills white over them right (after removing the grills)?

Make sure when you’re cutting out the white you leave the borders pretty thick or else the paint will connect. I had to do it quite a few times before I got it just right. You might have to print out the image a few times before you get the sizing correct as well.

Also check out post #2261 of this thread.

#7680 1 year ago

ACE

jazc4

Pinside member

Anyone have a decent used translite for sale? Thanks

#7681 1 year ago

A V

TonyVrd

Pinside+ Frequent

https://www.marcospecialties.com/pinball-parts/31-1925-18-SP

For that completionist. The backbox topper just recently came available on both Marcos and Plantery Pinball. You’ll still need to buy some mounting brackets.

http://www.planetarypinball.com/mm5/merchant.mvc?Screen=PROD&Product_Code=PPS-31-1925-18-SP&Category_Code=GS-2811

#7682 1 year ago

BRU

JediPimp

Pinside member

Quoted from TonyVrd:
https://www.aussiearcade.com/topic/70236-world-cup-soccer-94-speaker-stencil/
Make sure when you’re cutting out the white you leave the borders pretty thick or else the paint will connect. I had to do it quite a few times before I got it just right. You might have to print out the image a few times before you get the sizing correct as well.
Also check out post #2261 of this thread.

Thanks mate. Will look into this. There’s no way to fully remove the grills from the back box is there?

#7683 1 year ago

BRU

JediPimp

Pinside member

Does anyone have this decal on their ramp? Mine doesn’t have it and I don’t know how common it is.

0BB6C934-D141-47A1-B64A-B44D22420A3A (resized).jpeg

#7684 1 year ago

BRU

JediPimp

Pinside member

Does anyone know what size rubber ring I need to replace here for the double post? (circled in red).

Many thanks in advance!

711012F6-5820-409D-9743-9EAFBEC7C808 (resized).jpeg

Post last edited 1 year ago: “Add wording to be specific ”

#7685 1 year ago

KEV

Kevlar51

Pinside+ Frequent

Sykesville, MD

5y 58,800 438 3 10

Quoted from JediPimp:
Does anyone know what size rubber ring I need to replace here for the double post? (circled in red).
Many thanks in advance!
[quoted image]

7/16"

#7686 1 year ago

DJR

Gorgar666

Pinside+ Frequent

Quoted from TonyVrd:
For that completionist. The backbox topper just recently came available on both Marcos and Plantery Pinball. You’ll still need to buy some mounting brackets.
https://www.marcospecialties.com/pinball-parts/31-1925-18-SP
http://www.planetarypinball.com/mm5/merchant.mvc?Screen=PROD&Product_Code=PPS-31-1925-18-SP&Category_Code=GS-2811

Ordered! Where to get colored Slings protectors?

#7687 1 year ago

MMM

nerdygrrl

Pinside member

https://www.titanpinball.com/index.php?route=product/product&product_id=134&search=sling

Quoted from Gorgar666:Ordered! Where to get colored Slings protectors?

#7688 1 year ago

???

Banksy

Pinside apprentice

Unknown

2y 6,150 8

I was just playing my machine and then noticed this piece fall down the playfield and am having a hard time where it was previously located. Can anyone recognise this piece and advise on where to replace it?

20221011_214041 (resized).jpg

20221011_214059 (resized).jpg

#7689 1 year ago

MOT

Ceckitti

Pinside+ Frequent

Columbus, OH

4y 101K 1,085 13 70

Quoted from Banksy:
I was just playing my machine and then noticed this piece fall down the playfield and am having a hard time where it was previously located. Can anyone recognise this piece and advise on where to replace it?
[quoted image][quoted image]

Just by looking at the 2nd picture..... Im guessing that was maybe a soccer ball mod that someone installed at some point. And perhaps it took one too many airball hits and came apart.

Just a guess.

#7690 1 year ago

A V

TonyVrd

Pinside+ Frequent

Quoted from JediPimp:
Thanks mate. Will look into this. There’s no way to fully remove the grills from the back box is there?

Yes there is, you’ll just have to disconnect the display, unscrew the surrounding borders, which will give you access to the speaker grills, and then pry the staples out with a small flat head screw driver. After you’re done painting and letting the grills dry, you’ll be able to reinsert the staples in the same holes they were originally in. I used the back end of a screw drive to carefully hammer the stables back in place. Unless you have a staple gun that uses staple’s similar in size, then it won’t matter where you position the new staples.

#7691 1 year ago

ACE

jazc4

Pinside member

Quoted from Gorgar666:
Ordered! Where to get colored Slings protectors?

I just put in my order for the topper too! When they come in we'll have to collaborate on a good way to mount it. Those sling protectors look nice as well.

#7692 1 year ago

A V

TonyVrd

Pinside+ Frequent

https://www.marcospecialties.com/pinball-parts/535-6072-00

Quoted from jazc4:
I just put in my order for the topper too! When they come in we'll have to collaborate on a good way to mount it. Those sling protectors look nice as well.

I ordered these along with mine:

I’ll let you know how they fit and if they work.

#7693 1 year ago

ACE

jazc4

Pinside member

Quoted from TonyVrd:
I ordered these along with mine:
https://www.marcospecialties.com/pinball-parts/535-6072-00
I’ll let you know how they fit and if they work.

Awesome! Thanks!!

#7694 1 year ago

A V

TonyVrd

Pinside+ Frequent

Quoted from JediPimp:
Does anyone have this decal on their ramp? Mine doesn’t have it and I don’t know how common it is. [quoted image]

It’s on mine. Let me know if you need to know the exact placement.

#7695 1 year ago

ACE

jazc4

Pinside member

Quoted from TonyVrd:
It’s on mine. Let me know if you need to know the exact placement.

I don't have that one either. Can you post a pic please?

#7696 1 year ago

A V

TonyVrd

Pinside+ Frequent

Quoted from jazc4:
I don't have that one either. Can you post a pic please?

Along the upper left ramp. The decal is affixed on the inside of the ramp.

C27E64BE-90FF-43CD-B8C6-DB59D0A6A853 (resized).jpeg

EE14F028-E826-4B08-B454-0FF005F5D17D (resized).jpeg

#7697 1 year ago

BRU

JediPimp

Pinside member

Quoted from Kevlar51:
7/16"

Thanks mate. I got that size of rubber, good luck on my part.

#7698 1 year ago

BRU

JediPimp

Pinside member