(Topic ID: 50131)

World Cup Soccer 94 owners. Everyone welcome.

By DEWSHO

8 years ago


Topic Heartbeat

Topic Stats

  • 6,951 posts
  • 605 Pinsiders participating
  • Latest reply 1 hour ago by martymart
  • Topic is favorited by 204 Pinsiders

You

Linked Games

Topic Gallery

View topic image gallery

20210728_212007 (resized).jpg
20210728_212017 (resized).jpg
F1005A79-C60A-43EC-A6B1-9E86F350A1B3 (resized).jpeg
4CD39FAE-3383-42EF-BED7-3A1DC33C1398 (resized).jpeg
PPS-03-91341 (resized).jpg
004973DD-F699-44DD-87D3-A4C1210D804E (resized).jpeg
16ED1248-269E-4DD0-8841-18836170F849 (resized).jpeg
6B94C097-B0DE-40F9-BE80-D9309ECDA6C9 (resized).jpeg
34F750FE-3C84-4941-A4F8-97CDC151C767 (resized).jpeg
B99EBAA1-50A3-4726-81AE-1F40025EA890 (resized).jpeg
493FEC0E-5339-43FF-9528-31C8021413C6 (resized).jpeg
04505BD9-6195-4A1B-9E8E-10EEFD2B9D5B (resized).jpeg
51233977-43CF-485E-B2EF-F4ACA8030E1F (resized).jpeg
05985233-DB53-4E0C-A2A3-E943FAB431C3 (resized).jpeg
C95A00AC-3D30-473F-9015-A2D2CF3A3E78 (resized).jpeg
6D2B50E7-EB35-4948-A144-E6A1334050EA (resized).jpeg

There are 6951 posts in this topic. You are on page 138 of 140.
#6851 79 days ago

Soccer ball sorted, thanks wombat
Now another silly question. Has anyone hooked up post leds to the star posts on this game? All the GI is boards so what would you solder the wires to?

#6852 79 days ago
Quoted from allsportdvd:

Soccer ball sorted, thanks wombat
Now another silly question. Has anyone hooked up post leds to the star posts on this game? All the GI is boards so what would you solder the wires to?

simple solder wires to board or to twist socket

#6853 79 days ago

or ever to the wires on the 555 globe

#6854 79 days ago

Thanks for the answers. The globes under each scoop shot are GI aren’t they?

#6855 79 days ago
Quoted from allsportdvd:

Thanks for the answers. The globes under each scoop shot are GI aren’t they?

scoop shot ??

#6856 79 days ago

The light that sits under the purple plastic in the free kick scoops if that makes sense

#6857 74 days ago
Quoted from Qasper:

I don’t believe I have an issue with optos since the coils won’t fire in test. The ball also ends when it drains and the game continues to player 2. Sorry if I was not clear, I don’t have much knowledge when it comes to electrical issues. During ball search the high power coils also doesn’t fire

I managed to get the game working again. Unfortunately I am not exactly sure where the fault was. It was 100% not the fuses and 100% not the wires. I actually think it was one of the chips that was not correctly seated in the back box.

#6858 73 days ago

Got my new CPR playfield today. Am really pleased as it looks amazing.
20210521_135834 (resized).jpg

#6859 71 days ago

Can anyone please photograph the top and underside of the metal brackets that sit above the 2 lower scoops? The bolts I have don’t fit and also don’t line up with the purple plastic parts underneath. Over 200 photos and that I have no picture of

#6860 71 days ago
Quoted from allsportdvd:

Can anyone please photograph the top and underside of the metal brackets that sit above the 2 lower scoops? The bolts I have don’t fit and also don’t line up with the purple plastic parts underneath. Over 200 photos and that I have no picture of

Hope these help......
1B4405B0-3F5D-4AFC-A9E6-7126C759F7B9.jpeg3DD38E32-BB1D-472B-A268-C4DE9AF43DF0.jpeg66B58AF3-6F62-49A2-943A-4238933FB9B0.jpegB1C27D7A-DCCF-4CC3-99B7-BB874D88B550.jpegEF436F8F-CBCB-49DA-B6E0-C677C5205EA0.jpeg

#6861 70 days ago
Quoted from AUKraut:

Hope these help......
[quoted image][quoted image][quoted image][quoted image][quoted image]

Thanks, they do a little but I need to see under the playfield as well so I can get the right nuts on the bottom

#6862 70 days ago
Quoted from allsportdvd:

Thanks, they do a little but I need to see under the playfield as well so I can get the right nuts on the bottom

Sorry, the pin is over at our league location, don't have access to take any pics right now..........

#6863 66 days ago

Recieved my WCS94 CPR playfield today and it’s a beauty! The only thing that looks different is the color of the skin tone. Not sure if this is due the new digital print process compared to silkscreening. The photos of the playfield on CPR’s website look like they have the correct tone. Anyways I’m happy they made them as it’s a well needed playfield. Nice used ones or Nos ones were near impossible to find. Thanks again CPR!

10D23E65-0944-43A1-AA9D-479E0B338CB0 (resized).jpeg3F75509A-17B2-4611-A7FB-CAE5072ABA0F (resized).jpeg4BA4984C-115C-4760-8C0D-D374C4562631 (resized).jpeg6D2B50E7-EB35-4948-A144-E6A1334050EA (resized).jpeg
#6864 66 days ago
Quoted from jk:

The only thing that looks different is the color of the skin tone.

那是你弹球场上的漂亮小妞
(Nà shì nǐ dàn qiúchǎng shàng de piàoliang xiǎoniū)

#6865 66 days ago

I am having some sort of issue when I enter the World Cup final Los Angeles match. When I shoot the final draw to start the match a ball comes into the trough. I shoot that ball and then the one comes out of the final draw. Then another ball loads into the trough. I don’t shoot it because I like to play with 2 balls then another ball loads into the trough until all of the balls are in the trough. It isn’t supposed to do that. What can I do to fix that. All other aspects of the game seem to be working with no issues.

#6866 66 days ago
Quoted from jk:

Recieved my WCS94 CPR playfield today and it’s a beauty! The only thing that looks different is the color of the skin tone. Not sure if this is due the new digital print process compared to silkscreening. The photos of the playfield on CPR’s website look like they have the correct tone. Anyways I’m happy they made them as it’s a well needed playfield. Nice used ones or Nos ones were near impossible to find. Thanks again CPR!
[quoted image][quoted image][quoted image][quoted image]

Wowza.....looks like a bad case of Jaundice!!! I hope CPR corrects that!!

#6867 65 days ago
Quoted from AUKraut:

Wowza.....looks like a bad case of Jaundice!!! I hope CPR corrects that!!

It's the Simpsons version..!

2 weeks later
#6868 50 days ago

Need some help, just picked up a WCS and the ball continually spins. As soon as I start up the machine it is spinning and stays on. I am concerned it will burn out the motor. Anyone have any suggestions on what to look at? I haven’t had too much time to troubleshoot just yet. Thx!

#6869 50 days ago
Quoted from Bananaboyandy:

Need some help, just picked up a WCS and the ball continually spins. As soon as I start up the machine it is spinning and stays on. I am concerned it will burn out the motor. Anyone have any suggestions on what to look at? I haven’t had too much time to troubleshoot just yet. Thx!

Obvious first question...... does the ball stop when you score a goal?

#6870 50 days ago

No, it just keeps spinning for the entire game.

#6871 50 days ago
Quoted from Bananaboyandy:

No, it just keeps spinning for the entire game.

Short somewhere.
Either the motor board is bad, or one of the transistors on the PDB is bad and shorted closed.

#6872 50 days ago
Quoted from jk:

Recieved my WCS94 CPR playfield today and it’s a beauty! The only thing that looks different is the color of the skin tone. Not sure if this is due the new digital print process compared to silkscreening. The photos of the playfield on CPR’s website look like they have the correct tone. Anyways I’m happy they made them as it’s a well needed playfield. Nice used ones or Nos ones were near impossible to find. Thanks again CPR!
[quoted image][quoted image][quoted image][quoted image]

So I contacted CPR to see if the “jaundice girl” playfield I received was a “one off” or one of the early runs of their new playfields. They responded and said the first couple of the run were like mine and then corrected. Anyways they sent me a new playfield to exchange as it bothered me. The new one looks great! Here’s some side by side pics of the 2 cpr playfields and the new exhanged one compared to the Bally original. Pretty spot on! Thanks CPR!

05985233-DB53-4E0C-A2A3-E943FAB431C3 (resized).jpeg51233977-43CF-485E-B2EF-F4ACA8030E1F (resized).jpegC95A00AC-3D30-473F-9015-A2D2CF3A3E78 (resized).jpeg
#6873 50 days ago
Quoted from Coyote:

Short somewhere.
Either the motor board is bad, or one of the transistors on the PDB is bad and shorted closed.

Coyote, is there any way to diagnose which it is? It was working fine after the first few plays and then it didn’t. Also, what is the PDB?

#6874 50 days ago
Quoted from Bananaboyandy:

Coyote, is there any way to diagnose which it is? It was working fine after the first few plays and then it didn’t. Also, what is the PDB?

PDB - Power Driver Board.

I am on my phone so I do not have the manual handy, but -

There should be a motor control board mounted under the playfield. It should have ~4 wires running to it - +V, GND, Clockwise (CW) Driver, Counter-Clockwise (CCW) Driver. Another plug would have 2 wires going to the motor.

Check first that either the CW or CCW isn't connected to ground when the game is turned on and the ball should NOT be spinning. Neither should be. They should only be connected (continuity) to ground when the ball moves. If neither driver wire is grounded, then the power-driver board is good; it means that one of the transitors on the motor board under the PF died.

#6875 50 days ago
Quoted from Coyote:

PDB - Power Driver Board.
I am on my phone so I do not have the manual handy, but -
There should be a motor control board mounted under the playfield. It should have ~4 wires running to it - +V, GND, Clockwise (CW) Driver, Counter-Clockwise (CCW) Driver. Another plug would have 2 wires going to the motor.
Check first that either the CW or CCW isn't connected to ground when the game is turned on and the ball should NOT be spinning. Neither should be. They should only be connected (continuity) to ground when the ball moves. If neither driver wire is grounded, then the power-driver board is good; it means that one of the transitors on the motor board under the PF died.

I had an issue w a TZ clock which uses the same board and it was a bad transistor on the PDB

1 week later
#6876 40 days ago

Lighting question...
Going comet led.

Should i do sunlight or cool white everywhere even in inserts... or color match inserts?

1smd or 2smd?

Non ghosting or regular?

Anyone know how many bayonet or wedges i need for this game?

Thx so much in advance!

#6877 40 days ago

Warm/sunlight 2smd frosted dome is always the answer, haha.

Buy a 100 qty bag each of #44 and #555, it'll have you covered for WCS, and then mostly for another game. I try to always have a bag of each on hand.

#6878 39 days ago
Quoted from Dantesmark:

Lighting question...
Going comet led.
Should i do sunlight or cool white everywhere even in inserts... or color match inserts?
1smd or 2smd?
Non ghosting or regular?
Anyone know how many bayonet or wedges i need for this game?
Thx so much in advance!

I strongly recommend the purple passions for the purple inserts. They were practically made for this game.

I personally prefer color matching the inserts generally--and the teal bulbs look great in the jets and upper-right lanes.

#6879 39 days ago

Does anyone have a lead on wher I can get the metal ball guide for the mini playfield? I can't even find a part number and I've misplaced mine in the restoration I'm doing - D'oh!

#6880 38 days ago

For those that put briterings pop bumper led mod on their game... what color leds did u use under the teal cap?

#6881 38 days ago
Quoted from Dantesmark:

For those that put briterings pop bumper led mod on their game... what color leds did u use under the teal cap?

Warm white to match the GI lighting LEDs since teal wasn’t available

#6882 38 days ago

I went with green I also put a green bulb in the mascot/striker shot and in the lanes everything else is sunlight. I did put warm in the coin toss to match the gold.
04505BD9-6195-4A1B-9E8E-10EEFD2B9D5B (resized).jpeg
493FEC0E-5339-43FF-9528-31C8021413C6 (resized).jpeg

#6883 38 days ago

Any other kickass mods u guys recommend?

#6884 38 days ago
Quoted from Dantesmark:

Lighting question...
Going comet led.
Should i do sunlight or cool white everywhere even in inserts... or color match inserts?
1smd or 2smd?
Non ghosting or regular?
Anyone know how many bayonet or wedges i need for this game?
Thx so much in advance!

Teal in the "ultra" lightning bolts. Trust me.

I also mixed in some other pastel colors in some of the feature lights. Looks amazing!! Ill try to get some good pics of it tonight and post it.

And def go with Comet flashers!!! The light show after a goal or winning the cup is outstanding.

#6886 38 days ago

Some of my Comet LED color options. Hard to get good photos with phone camera. Game looks SPECTACULAR in person when playing. Especially the Goal light shows. The Comet cool white flashers are a must.

I also have a Green flasher in the yellow "GOAL" below the goalie. Give a cool effect when the yellow and green start alternating.

6B94C097-B0DE-40F9-BE80-D9309ECDA6C9 (resized).jpeg004973DD-F699-44DD-87D3-A4C1210D804E (resized).jpeg16ED1248-269E-4DD0-8841-18836170F849 (resized).jpeg34F750FE-3C84-4941-A4F8-97CDC151C767 (resized).jpegB99EBAA1-50A3-4726-81AE-1F40025EA890 (resized).jpeg

#6887 37 days ago

Anyone have a lamp diagram that lists bayonet, wedge, and flash locations?

#6888 37 days ago
Quoted from Dantesmark:

Anyone have a lamp diagram that lists bayonet, wedge, and flash locations?

Here's you go... page 2-45

https://www.arcade-museum.com/manuals-pinball/W/World_Cup_Soccer_OPS.pdf

#6889 37 days ago

Thx guys... ended up jus buying the whole kit comet sells... im lazy. Lol

#6890 37 days ago
Quoted from allsportdvd:

Does anyone have a lead on wher I can get the metal ball guide for the mini playfield? I can't even find a part number and I've misplaced mine in the restoration I'm doing - D'oh!

How’s the resto coming along? I’ve finally brought my WCS home and contemplating pulling it apart sometime soon but it’s just too much fun to play!

#6891 36 days ago

Just picked up a world cup soccer. Noticed the ball is not diverting into the pops when it's supposed too. My question is what mechanism normally diverts that ball thanks

#6892 36 days ago
Quoted from Flynnyfalcon:

How’s the resto coming along? I’ve finally brought my WCS home and contemplating pulling it apart sometime soon but it’s just too much fun to play!

Well it’s nearly done but has stalled because I can’t find the metal guide for the mini playfield!
Cabinet is done, playfield cleared and repopulated apart from the coin toss and ramps.

#6893 36 days ago

How tough is it to Led this pin and add all the cliffys?

#6894 36 days ago
Quoted from Dantesmark:

Any other kickass mods u guys recommend?

Avoid Cliffies in this game. They mess with gameplay too much. Just protect the saucer edges and scoop edges with Mylar.

Color dmd as always, and I also got a cool little scoop light mod from Lee’s mods.

#6895 36 days ago
Quoted from chuckwurt:

Avoid Cliffies in this game. They mess with gameplay too much. Just protect the saucer edges and scoop edges with Mylar.
Color dmd as always, and I also got a cool little scoop light mod from Lee’s mods.

Thx Chuck!

#6896 35 days ago
Quoted from Coolpinballdino:

Just picked up a world cup soccer. Noticed the ball is not diverting into the pops when it's supposed too. My question is what mechanism normally diverts that ball thanks

Lock Gate in the upper right of the playfield (#34 on the solenoid table). Make sure the spring is connected properly and check the solenoid/wiring.

#6897 35 days ago

Went in to work on my WCS today. Now when I turned the game on both scoop coils start firing non stop. It also just keeps kicking balls out non stop from the trough any help thanks

#6898 35 days ago

Inspect the driver board and MPU for damage and possibly send them out to a pro to be rebuilt.

#6899 35 days ago
Quoted from chuckwurt:

Inspect the driver board and MPU for damage and possibly send them out to a pro to be rebuilt.

I tried an extra good CPU board I had and same problem so I'm not suspecting the boards as much.

#6900 35 days ago

The one thing I did

Quoted from chuckwurt:

Inspect the driver board and MPU for damage and possibly send them out to a pro to be rebuilt.

Hey Chuck do you have any streams or YouTube’s of this pin, I could use some pointers.

There are 6951 posts in this topic. You are on page 138 of 140.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside