I made my stencil using Oramask 811 and clear transfer tape. I started by looking at pictures on this site and then drawing the pattern on the Oramask using pencil. I then lightly scored the area I wanted to paint and removed the excess material. I then put the clear transfer tape over it and I was done. It is easy although very time consuming.I would have bought a set if they were available. Here are a few pictures of my work in progress.
A16BBD99-4993-4EBE-B95C-EF12634C5FBC (resized).jpeg
6D18B76B-9D60-4A52-8132-9C587191908A (resized).jpeg
C018EB24-F2E0-4321-B721-83907EAF9F4E (resized).jpeg