FIREHOUSE (finalized / in production) Qty will be capped at 36 units at this time. I might do more at a later date after my other mods are all finalized.
This is a firehouse mod for the Stern Ghostbusters machine that fills up the back left open area of the machine. I have a Pro version so my design is based around the machine that I have. I do not have access to any other GB units at this time so I can’t say 100% if this mod is compatible with other trims. If you wish to share pics and info I can try to ensure this mod fits all other machines.
This firehouse mod replaces the factory metal and plastic firehouse. The old unit is simply removed and the new unit secures using existing holes in the playfield and the side rail. No modifications are needed to make this mod fit other than removing a few existing plastic / post accessories and relocating a single existing flasher LED board from the old fire house roof to the new firehouse roof.
The fasteners that hold the mod in place are fully concealed and will not be visible when installation is complete. The roof of the fire house is removable to allow for the transfer of the existing single flasher LED. The two roof screws are then covered with roof accessories that have a magnet to keep them in place.
The firehouse has 2 led (warm white) lights per level to light the interior and are reconnected to the same circuit that was provided for the factory prop, this means the firehouse will also flash on and off during game play as intended. These new led lights will be fully wired and ready to plug into the existing playfield harness connection with no modifications. The interior of the mod has some minor accessories such as
Main floor - Brown colour locker cabinets, wood colour desk with chairs, brass fire pole (real Brass!), black fire pole fall arrest guard.
Upper floor - Stargazer Pinball machine, kitchen counter with marble top and upper cupboards, silver colour lockers, table and chair set, and a black fire pole fall arrest guard.
This mod is made up from over 45 individual parts printed from various colours of filaments and UV cured resin and fully assembled on my end with hours put into each unit for cleanup and assembly.
Doing a run of 36 units total. Cost of the firehouse unit is $250usd. Shipping a single unit within Canada and the USA is $12usd and shipping overseas will be $18usd. Shipping more than one unit at a time will have a shipping price increase due to the larger box. All shipments will have a tracking number generated with the item is shipped out.
If you are interested in a FIREHOUSE mod and want to wait for another mod to be completed I will require payment for the Firehouse mod and I will hold it on the side and mark it as held on the list for you till the next purchased mod or mods are complete and ready to ship. Please be patient as finishing the other mods will take a little time.
IMG_6705 (resized).JPGIMG_6691 (resized).JPGIMG_6687 (resized).JPGIMG_6685 (resized).JPGIMG_6683 fix (resized).jpgIMG_6648 (resized).JPGIMG_6688 (resized).JPGIMG_6693 (resized).JPGIMG_6697 (resized).JPG