I built the tester and burned a rom and it just locks the 2 on board leds. This is a firepower that has the combo rom mod. I used a 2732 from and doubled the code up. Do I need to undo the mod and runs 2716 rom? The machine will run Leon's code from a 2732 without lock up.

I don't have a 2716 but I will hunt one down. So I should be able to use a 2716 where the board is configured for 2732 or do I need to undo something?

I have been running 2732 for the flipper roms for the last year so I guess I can assume that IC17 can take a 2716 or a 2732. I just ran through the entire leon test and every check passed. Including memory. I found a leon version 3 I am going to try as well.

All fixed. When I changed socket IC17 I damaged the pad tying Pin 11 to all 2 roms. IC14 was seperated from the the others on that pin. It is all fixed. Thanks for the help. I can say that it does not appear that a 2732 can be used with andre's rom but it will work with leon's.

I just wanted to come back and confirm that the andre rom will work in a combo firepower machine. It will not run on a 2732 doubled up. It must be run on a 2716. My 2716 showed up today so I figured I would give it a shot now that the machine was up and running.