Hello All
Recently acquired a B/W game and the support for the three button mechanism that usually resides on the coin door appears either missing or missing and broken. Have attached a couple pictures so hopefully it make sense. Maybe someone has what I need hopefully. Thank you

George

23BA3C32-7447-415A-B220-A3A978533A39 (resized).jpeg

2B96DFFC-6840-4486-B35F-D7F8A7E78DB8 (resized).jpeg

Additional pics. Looks like a plastic bit on the right side (as viewed from player position) coin mech holder

0EA47C5F-9322-44BE-883C-A063FDF005D4 (resized).jpeg

4E06CE14-9E09-4088-A7A4-CE79BBBD6F71 (resized).jpeg

7CBF5CB8-A490-43D8-80E8-0D89821015F3 (resized).jpeg

F8F0D7BE-DB55-477E-8D23-2E6073DCED56 (resized).jpeg

Hey there

You have metallic coin mexh housings and mine are plastic. There is a small tab that comes off the bottom of the right coin return portion of the mexh that the test buttons attach to. I have it glued for now but would like to get it replaced. Maybe someone has the guts of a coin door I can buy or can direct me to who may have made this door. If any additional pics are needed just ask

Thank you for trying. I am grateful

Thank you both Ken and Pinzap! I have it glued back together for the moment and it is holding so good for now but would like to get the part if it is available. Completists door looks a lot more robust that the plastic parts in my door.!

Where the actual three button test module connects to the door with the two small screws is where mine broke. Again, have it repaired for now but hoping I can get the replacement part. Looking again at Completists door from his AFM and it looks identical where the three button test module connects. This is the same on mine.

Thank you kindly. I’ll get in touch with terry

Thank you for looking. I am grateful!