Someone needs to follow through with making an official Wizard of Oz fans mod.

Saw this Woz for sale today, $24k, that includes a fans mod

SOLD!

Machine - For Sale

Wizard of Oz RR with rare and prototype mods Featured Archived

HUO - Documented (Home Used Only) - “A one of a kind opportunity. If you appreciate art and rarity in your machines then this Woz RR is the one you need. I am a super picky collector that enjoys both rarity and the ...”

2021-11-14

Hudson, OH

dbarker

24,000

Archived after: 53 days

Viewed: 1261 times

Status: Sold (amount undisclosed)

Contributed to Pinside

I crafted, what I think is the first introduction of the fan mod.

Screen Shot 2021-11-19 at 11.05.23 AM (resized).pngoz fans (resized).jpeg

Matt1724 that imagination, creativity, and execution is wow. Convincing me I really should get into printing.

I’m going to send this forum to the wonderful wizards of Mezel. Thats where I bought the wiring harnesses to make my fans.

RTS really good feed back… Changing title now

Spyderturbo007 you got that eagle eye, wow great catch.

On my own WoZ, I started to see it happen and bought the reflective band to protect that lower playfield. That's how I knew what you were calling out

woz_chipping (resized).jpeg

Didn’t have forum notifications on. I don’t have any diagrams, just what was posted in my video. Was super easy, got molex splitter from Mezel mods website under WoZ listed products

When my house wouldn’t land in correct spot, I changed some setting regarding the house. Some number setting I can’t quite remember and I could look it up later but it’s one of those zero through 30 value settings But it was never a random stop it was just stopping not in the right spot

The exact splitter product that I use is right here, PINBALL 12/5V POWER SPLITTER:

https://mezelmods.com/products/pinball-12v-5v-power-splitter?redirect_mongo_id=5b620e8db9dca009d1eee260&utm_source=Springbot&utm_medium=Web&utm_campaign=Email&variant=637903417

If I was to redo or make my fans again, I would be interested in this product that is specifically listed on WoZ page because I think it may help with mentioned house spinning misalign issue mentioned (again I fixed by changing house spinning value in game menu, read comments above)

https://mezelmods.com/collections/wizard-of-oz-pinball-mods/products/jersey-jack-pinball-power-kit?variant=2985809051677

OPINION: For great wind push + best low profile look, use "12v brushless blower fan":
https://www.amazon.com/s

Screen Shot 2021-12-17 at 11.33.08 AM (resized).png

RTS if the house doesnt stop at right position, I just changed a house spin specific setting that made it land in same spot (nearly) every time

When I have time I hope to post screen cap of that exact setting.

Also, how the heck do I turn on forum email notifications?!?!? I favorited this post.... Feel free to email me like someone else did

insight75 it looks like you are right. Great attention to details.

Mezel made it custom for me and then added it to there website.

It may ultimately be the second link I posted then

https://mezelmods.com/collections/wizard-of-oz-pinball-mods/products/jersey-jack-pinball-power-kit?variant=2985809051677

I attached some images here and with fine looking at details, you could chase this product down with Mezel. Talk to Kristen Mezel, she knows me/Acker and sent all wiring harnesses to me ([email protected])

IMG_0288 (resized).PNGIMG_0297 (resized).PNGIMG_0298 (resized).JPGScreen Shot 2018-02-05 at 12.11.30 PM (resized).png

Screen Shot 2021-12-17 at 2.56.54 PM (resized).png