World Cup Soccer
Bally, 1994I am thinking it is something simple, but I am pretty new to this. I have a Williams world cup soccer and none of the solenoids are working. the flippers work but both the pop bumpers and four ball releases don't work... I checked all the fuse and none of them seem to be blown, I played with all the connections and still nothing. I am a little stumped. I know someone is gonna tell me to check something right away and it will probably be it... and I will get go doh!!!
Did you check the fuses with a meter? Sometimes one can look good, but it's not. You might also check your fuse clips and make sure they are clean and hold the fuse tightly in place.
You need check your connectors as well. Also check continuity between the Solenoid driver board and the common wire to all the coils.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/williams-world-cup-soccer-no-soleniod-working and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Saskatoon, SK
Schertz, TX