Hi All - Looking at cclay's 2nd picture above of the optos near the entrance of the suicide ramp, they appear to be attached to a bracket mounted on the bottom of the main playfield. My machine, which I just bought, does not have this bracket. The opto on the right side has been attached to the ramp which has been destroyed and poorly repaired. The left opto is attached to a broken piece of the ramp laying on the playfield. Does anyone know where I can get this bracket? Once I replace the ramp, I'll need the optos in place and I'm not going to attempt to attach them to the ramp! Thanks for any help.

I believe my pin is an early production machine (as per ipbd) as the upper playfield does not have the water design behind the flipper (its all yellow.) I wonder if this would have something to do with the optos by the suicide ramp. Mine were attached to the ramp while the photo above shows them mounted to a bracket. Maybe the bracket was a modification after the early production machines?? Just guessing here. My machine also does not have the metal bracket shown in the first picture that goes over the lane where the VUK shoots the ball. Again, could it be that my machine never had this?? Any thoughts are greatly appreciated.

Any thoughts on the last two posts? Thanks