What happens with the leds when you press diagnostic button the first time? The self test needs to pass before you can enter data. Have you verified the data in test 4 after setting it?
You're currently viewing posts by Pinsider zacaj.
Click here to go back to viewing the entire thread.
What happens with the leds when you press diagnostic button the first time? The self test needs to pass before you can enter data. Have you verified the data in test 4 after setting it?
Quoted from Cheddar:So you can verify the values in test 04 like later MPU versions you just can't set them that way?
That's what the manual says. It's been a while since I had stock software in my system 3 hot tip so I can't remember precisely, just that it was a giant pain
Quoted from Lets:The 2 LED's on the board flash twice, very quickly.
"Have you verified the data in test 4 after setting it? "
No clue on how to do this
Refer to the hot tip manual, I think it should work the same
You're currently viewing posts by Pinsider zacaj.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/williams-system-3-settings?tu=zacaj and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.