Hello Everyone!
I just got a Banzai Run and have been cleaning and servicing it. I noticed that one of the pop bumpers was firing on its own in a somewhat random fashion, so I figured the EOS was off and got under there and cleaned up the area and everything looked ok. I then restarted the machine and all 3 pop bumpers will no longer fire. They do not fire in test mode (coil menu) either. Nothing is stuck...and I do not notice any loose wires or anything strange on the MPU board.
Could I have shorted it? I notice there are some caps that I tried moving around to see if I could get the pops to fire again but was unsuccessful.
What should I look at next?