Hi all
Trying to figure this out. I've got a 2nd replacement right display that was said to be working but I've never seen it work. Is there any way I can test to see if the display works or if the system is not sending the signal?
Matt
Hi all
Trying to figure this out. I've got a 2nd replacement right display that was said to be working but I've never seen it work. Is there any way I can test to see if the display works or if the system is not sending the signal?
Matt
It should work. The left display should be segments 1-16 and the right display should be segments 17-32. The strobes are shared between the displays.
Sorry. You're right. I have experience with the double display but not the separate L/R displays. The schematic wiring shows that the L display only looks at segments 1-16 coming in on the ribbon cable and the R display only looks at segments 17-24 on the additional connector as well as segments 25-32 on the ribbon cable.
If you have another System 11B (double alphanumeric) display you can connect that to the CPU board and see if it works.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/williams-system-11b-only-left-display-works?hl=grantopia and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.