(Topic ID: 236328)

Williams skill pool start button issue.

By pinballbrian

5 years ago



Topic Stats

  • 5 posts
  • 2 Pinsiders participating
  • Latest reply 5 years ago by Quercus22
  • No one calls this topic a favorite

You

Linked Games

Topic Gallery

View topic image gallery

20190217_101814 (resized).jpg
IMG_5861[1] (resized).JPG

You're currently viewing posts by Pinsider pinballbrian.
Click here to go back to viewing the entire thread.

#1 5 years ago

Hey guys,I'm having an issue with my start button.game was working fine.except score reels were sometimes not resetting to zeros.i then cleaned them .I touched nothing in lower cabinet.i then put head back on cabinet ,went to start game and start button would not start game.if I manually activate coin relay.game will reset and play fine.i checked the credit unit and switches are closed .Also start button is clean .any suggestions.thanks.

#3 5 years ago

Hi Richard,thanks for input.im going to check jones plugs.schems seem pretty straight foward.start goes to credit wheel.then to coin relay.switches are closed on credit wheel.thought since I took head off machine it's in that area.like I said ,machine worked til I tried a little maintanance.ha ha.will check lock relay again anyways.again thanks for input.

#4 5 years ago

Thank you Richard for second opinion on jones plug.and for posting piece of schem.its wire I thought it was ( see pic,green with red trace,)wire runs from coin relay thru jones plug to switch on credit unit.i thought I checked it last night.,must of been hanging by thread,because as I went over every wire on short jones plug again slowly.i found it.just made better connection and all is fine.again thanks.

20190217_101814 (resized).jpg20190217_101814 (resized).jpg

You're currently viewing posts by Pinsider pinballbrian.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/williams-skill-pool-start-button-issue?tu=pinballbrian and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.