The unit was this way when I purchased it. You hit the start button and it automatically plays all 4 players. I want to get it to the point where 1 push of the start button = 1 player. Any ideas on what I need to adjust? FYI = 1 button push only deducts 1 credit from the reel.

10-4. Thanks.

Unit doesn't seem to spring back to the EOS switch when reset. I moved it a couple clicks, turned unit on, hit start and the EOS switch was never activated because the wheel didn't rotate all the way back. Noticed there's a ground down section of the jagged tooth wheel that's in-line with the white plastic cylinder that comes into contact with the EOS switch. Does that sound right?

Compared it to the stepper unit just in front of it and all components move freely and about the same rotation.

20131113_174030.jpg

20131113_174038.jpg

20131113_174045.jpg

20131113_174052.jpg

20131113_174058.jpg

Stepper unit was cleaned. Post was moved. To do this, I removed the switch, rotated wheel down, reinstalled the switch. Same exact results.

Now where do I go.....

Got it!!!!!!!!!!!!!! Didn't want to re-home itself every time. Added one more turn to the spring tension and good to go.

Absolutely awesome work folks. Thank you!