Indiana Jones: The Pinball Adventure
Williams, 1993I purchased a topper for my IJ from Cointaker and I am having problems with it blowing my F116 fuse. I do have mods that are plug into J116 & J117 (color DMD, speaker lights ect) already. I never had any problem until I added the topper. The game will play for about 10 minutes and will then blow the fuse. It has a 3 amp fuse in F116 and was wanting to know if I could go to a 4 or 5 amp fuse because of the load because of the extra mods.
you have to much mods in your machine. you need to plug it to power supply or i dont know if anyone made a board for that but i think yes. it was the same problem in my tz to much mods blow the fuse.... you have to much amp. over the limit... and its better to not use 4 amp fuse you can burn other things in your board...
**UPDATE**
look here its will solve your problem 
https://mezelmods.com/products/12v-power-tap-spike-system?variant=4888158468
I'd suggest reaching out to Rob Kahr as he might have insight into this problem....
http://kahr.us
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/williams-indiana-jones-topper-problem and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Dallas, TX
Barrie, ON