Did you ever figure out the issue with the hideout and kickback? Mine does the same. I found where there are 2 fuses. One 2 1/2 amp fuse between the hideouts and kickback (Violet/yellow stripe wire) and a 5 amp in the flipper board. I found that I kept blowing the fuse when the kickback coil tried to fire. I have looked up the wiring diagram update and found the kickback update. Other than the color of 2 of the wires being wrong, the wiring follows the diagram. Let me know how you fixed this as this is the last thing I need to get mine 100% working.