I recently created my own "Donut Heaven Mod" for the Williams Getaway.
(More pics here: https://pinside.com/pinball/forum/topic/getaway-club-dispatch-run-a-make-on-license-plate-kingpin)

This is intended to be 3D printed.... and to look more detailed and way cooler than everything that existed so far

The Letters on the roof are illuminated and animated with a stripe of Neopixel-Leds and an Arduino. (19 LEDs from a 144LEDs/meter stripe)
But you can also just add colored led stripe.

I will give away the 3D-print-STL files for free to anyone who PM me under the following simple conditions:

1) You do not share the STL files nor hardcopies with anyone else. These are indented for your personal use only on your own pin. No commercial use!
2) If others you come into contact are interested, direct them to me and I will also share with them under the same conditions.
3) Post pics here in this thread of your efforts.

If you agree, PM me your eMail-Adress .... and I will mail you the STL files!

##############
UPDATE
##############
Ok... I've setup a Shop at Shapeways:
https://www.shapeways.com/shops/olligpinballmods

(Don't blame me for their high price-tags ............ My earning is about 10$ on each kit)

Unfortunately Shapeways does not offer clear plastic for the letters on the roof
I added it anyways....in white and other colors....

------------------------------------------------------------------------------------
In the future I may also offer complete kits including LEDs and Arduino... depending on how many people are interested in a kit.
Please vote above....
2018-10-02 08_46_33-3D design Donut Heaven - Final 10 _ Tinkercad.png2018-10-02 08_46_50-3D design Donut Heaven - Final 10 _ Tinkercad (resized).png2018-10-02 08_47_26-3D design Donut Heaven - Final 10 _ Tinkercad (resized).png2018-10-02 08_48_00-3D design Donut Heaven - Final 10 _ Tinkercad (resized).png2018-10-02 08_48_12-3D design Donut Heaven - Final 10 _ Tinkercad (resized).png837116d4e97cefbc1af14b08d1f8c8c60460231b (resized).jpgdonut1 (resized).jpgdonut2 (resized).jpgdonut3 (resized).jpgdonut4 (resized).jpgdonut5 (resized).jpg

Never had this so far... balls will run down the plastic ramp where the Lambo is... and behind the Donut is not enough space!

Some more pics from the current incarnation with the new Donut-Window in the sidewall.

IMG_20180930_200649546 (resized).jpg

IMG_20180930_200654061_BURST011 (resized).jpg

IMG_20180930_200707761_HDR (resized).jpg

IMG_20180930_200721975 (resized).jpg

IMG_20180930_200758586 (resized).jpg

A late christmas gift

I just uploaded the Donut Heaven to thingiverse!
No commercial use please!

Happy printing everyone...

https://www.thingiverse.com/OlloG/designs

Thanks for showing the pics...

Check out my traffic light too:

https://pinside.com/pinball/forum/topic/williams-getaway-new-traffic-light-mod#post-4772661